15 Greatest Edelbrock Performers

 

Edelbrock 7561 Performer RPM Air Gap Intake Manifold wBoltsGasketsRTV - BBC Oval Port #ad

Edelbrock 7561 Performer RPM Air Gap Intake Manifold w/Bolts/Gaskets/RTV – BBC Oval Port

Edelbrock 7561 Performer RPM Air Gap Intake Manifold w/Bolts/Gaskets/RTV – BBC Oval Port #ad - The air-gap design features an open air space that separates the runners from the hot engine oil resulting in a cooler, denser charge for more power. For square bore carburetors only. Part # 135-2001. This listing is for an intake kit for the big block chevy with oval port heads consisting of an edelbrock performer rpm air gap intake manifold (part #7561), edelbrock intake manifold gasket set (part # 7203), arp black oxide intake manifold bolt set (part # 135-2001), permatex black rtv (part #82180) and mr. Will not fit under stock hood of corvette, 1964-67 chevelle or 1967-81 camaro arp black oxide intake manifold bolt set. Gasket carburetor stud kit (part # 59) this intake works with square bore carburetors. No provision for exhaust heated chokes and no exhaust crossover. Includes rear water outlets, two distributor clamp locations and nitrous bosses. We’ve put together a proven kit to take the guesswork out of choosing the right components for your performance oval port bbc engine edelbrock performer rpm air gap intake manifold. They also feature precision-rolled threads, which prevent galling, while promoting more consistent torque loading. Chevy v8’s with large oval-port cylinder heads (1975 and earlier) or edelbrock performer/performer rpm heads. Accepts all late model alternator and a/c brackets for the street. Part # 7561. The rpm air-gap incorporates the same race-winning technology that’s been used on our victor series competition intakes for decades. Arp’s rugged, black-oxide coated chromoly intake manifold bolts are rated at 170,000 psi. D. I. They’re precision-machined for optimum thread engagement and have a wide-area flange for better load distribution. Rpm air-gap 2-o (1500-6500 rpm) designed for street 396-502 c.

 

Edelbrock 72051 Performer RPM Fuel Solenoid #ad

Edelbrock 72051 Performer RPM Fuel Solenoid

Edelbrock 72051 Performer RPM Fuel Solenoid #ad - They come in a red anodized finish. These high quality solenoids feature a very low amperage draw and the low current consumption coil has a teflon plunger for extreme reliability. The edelbrock performer rpm fuel solenoids have a stainless steel base and a powder coated coil cover for durability and good looks.

 

Edelbrock 2104 Performer Intake Manifold #ad

Edelbrock 2104 Performer Intake Manifold

Edelbrock 2104 Performer Intake Manifold #ad - Manifold height is 350″ in the front and 460″ in the rear. Accepts late model alternator and air conditioning brackets. 50-state legal for use on vehicles originally equipped with 4-barrel carburetors. Comes with rear water crossovers. Port dimensions are 188″ height by 114″ wide.

 

Edelbrock 3790 Edelbrock Performer-Plus Camshaft and Lift Kit #ad

Edelbrock 3790 Edelbrock Performer-Plus Camshaft and Lift Kit

Edelbrock 3790 Edelbrock Performer-Plus Camshaft and Lift Kit #ad - Intake valve lift with factory rocker arm ratio is 0420″ and exhaust valve lift is 0442″. Designed for increased horsepower and optimum torque from the low-end to the mid-range. Intake duration at 0050 lift is 204 and the exhaust duration is 214. Retainers, locks, valve stem seals, timing chain and gears, pushrods, rocker arms, gaskets and lifters are not included. Basic operating rpm range is idle-5,500.

 

Edelbrock 3702 Performer-Plus Camshaft and Lifter Kit #ad

Edelbrock 3702 Performer-Plus Camshaft and Lifter Kit

Edelbrock 3702 Performer-Plus Camshaft and Lifter Kit #ad - Hydraulic flat tappet style camshaft and lifter. Offers improved throttle response and torque. Use only stock ratio rocker arms which are not included with the kit. Retainers, locks, valve stem seals, timing chain and gears, pushrods, rocker arms, gaskets and lifters are not included. Dual springs should not be included.

 

Edelbrock 1405 Performer 600 CFM Square Bore 4-Barrel Air Valve Secondary Manual Choke New Carburetor #ad

Edelbrock 1405 Performer 600 CFM Square Bore 4-Barrel Air Valve Secondary Manual Choke New Carburetor

Edelbrock 1405 Performer 600 CFM Square Bore 4-Barrel Air Valve Secondary Manual Choke New Carburetor #ad - Manual choke with 4-barrel square bore carburetor flange. Primary venturi booster is a bottom feed design for smoother acceleration and better drivability. Backed by edelbrock’s exclusive 90 day warranty. Single feed fuel inlet with air valve secondary type. Shiny silver finish and calibrated for gasoline.

 

Edelbrock 2167 Performer-Plus Camshaft and Lifter Kit #ad

Edelbrock 2167 Performer-Plus Camshaft and Lifter Kit

Edelbrock 2167 Performer-Plus Camshaft and Lifter Kit #ad - Kit includes a camshaft, hydraulic lifters, assembly lube and full instructions. Only stock ratio rocker arms should be used with the kit. Dual springs should not be used. Intakecamlift is 0265 and exhaust valve lift is 0280. Intakevalvelift withfactory rockerarmis 0460 and exhaust valve lift is 0480.

 

Edelbrock 3881 Performer Intake Manifold #ad

Edelbrock 3881 Performer Intake Manifold

Edelbrock 3881 Performer Intake Manifold #ad - The edelbrock performer 5. The removable plenum cover allows access to runners for modification and base manifold is cnc port matched to upper manifold for maximum performance. This manifold made 34 foot / pounds more torque than stock on our test engine. The intake section includes plenum only and is at the upper part. 8 efi (electronic fuel injection) intake manifold can be used with the edelbrock’s twin throttle body 350-3837. The upper and plenum cover are powder-coated light titanium gray. The modular design incorporates the latest airflow technology and cad programming for maximum power gains up to 37 horsepower at 5,500 rpm with no loss of low speed torque. This manifold features a broad power range from idle to 5,500 rpm. The base is as-cast and not powder-coated.

 

Edelbrock 2131 Performer Aluminum Intake Manifold #ad

Edelbrock 2131 Performer Aluminum Intake Manifold

Edelbrock 2131 Performer Aluminum Intake Manifold #ad - The edelbrock performer manifolds are dual-plane, low-rise intake manifolds with a 180 degree firing order and patented runner design. The performers are ideal for passenger cars, trucks, tow vehicles and rv’s. These manifolds also deliver improved throttle response over stock intakes and are available with non-egr styles. They accept late-model choke, water neck, alternator, air conditioning brackets and have provisions for oil filler tube. This combination boosts torque over a wide rpm range, from off-idle all the way up to 5,500 rpm.

 

Edelbrock 3704 Performer TBI Intake Manifold #ad

Edelbrock 3704 Performer T.B.I. Intake Manifold

Edelbrock 3704 Performer T.B.I. Intake Manifold #ad - Plenum and base material is made of aluminum with a natural finish. Accepts all oem equipment and small-bore (1-11/16″) throttle body injectors only. Basic operating rpm is from ideal to 5,500 rpmwill not fit caprice or buick and cadillac “b” bodies. Performer intake is 50-state street legal, when used with the correct carburetor and in the correct application. Provides outstanding throttle response and increased torque.

 

Edelbrock 2176 Performer Aluminum Intake Manifold #ad

Edelbrock 2176 Performer Aluminum Intake Manifold

Edelbrock 2176 Performer Aluminum Intake Manifold #ad - These manifolds also deliver improved throttle response over stock intakes and are available with non-egr styles. The edelbrock performer manifolds are dual-plane, low-rise intake manifolds with a 180 degree firing order and patented runner design. This combination boosts torque over a wide rpm range, from off-idle all the way up to 5,500 rpm. They accept late-model choke, water neck, alternator, air conditioning brackets and have provisions for oil filler tube. The performers are ideal for passenger cars, boats, tow vehicles and rv’s.

 

Edelbrock 7116 Performer RPM Vortec Intake Manifold #ad

Edelbrock 7116 Performer RPM Vortec Intake Manifold

Edelbrock 7116 Performer RPM Vortec Intake Manifold #ad - Broad power band makes performer rpm ideal for street or strip. Manifold accepts square-bore carburetor only. Not for emissions-equipped engines and has no provision for exhaust-heated chokes. Intended for high-performance street or marine engines operating from idle to 5,500 rpm. Single four-barrel for the street rod, marine and engine swap market engines.

 

Edelbrock 2601 Performer Air-Gap Aluminum Intake Manifold #ad

Edelbrock 2601 Performer Air-Gap Aluminum Intake Manifold

Edelbrock 2601 Performer Air-Gap Aluminum Intake Manifold #ad - The air-gap design features an open air space that separates the runners from the hot engine oil resulting in a cooler, denser charge for more power. The edelbrock performer air-gap intake manifold features the air-gap design for the ultimate street performance in the idle to 5,500 rpm range. There is no provision for exhaust heated chokes or exhaust crossover. The great looks of the performer air-gap along with the solid idle to 5,500 rpm performance makes this an ideal choice for street rods and street machines. Torque and horse power are increased. The high-velocity runners deliver excellent throttle response throughout the power band. This manifold is dual-plane, low-rise intake manifolds with a 180 degree firing order and patented runner design that is not available in other brands.

 

Edelbrock 7521 Ford 260289302 Performer RPM Air Gap Intake Manifold wBoltsGasketsRTV #ad

Edelbrock 7521 Ford 260/289/302 Performer RPM Air Gap Intake Manifold w/Bolts/Gaskets/RTV

Edelbrock 7521 Ford 260/289/302 Performer RPM Air Gap Intake Manifold w/Bolts/Gaskets/RTV #ad - Includes nitrous bosses. I. They’re precision-machined for optimum thread engagement and have a wide-area flange for better load distribution. Performer rpm air gap 289/302 (1500-6500 rpm) designed for street 289-302 c. Arp black oxide intake manifold bolt set. We’ve put together a proven kit to take the guesswork out of choosing the right components for your early small block ford edelbrock performer rpm air gap intake manifold. Part # 7521. Consisting of an edelbrock performer rpm air gap intake manifold (part #7521), edelbrock intake manifold gasket set (part # 7220), arp black oxide intake manifold bolt set (part # 154-2001), permatex black rtv (part #82180) and mr. Part # 154-2001. Arp’s rugged, black-oxide coated chromoly intake manifold bolts are rated at 170,000 psi. Gasket carburetor stud kit (part # 59) this intake works with square bore carburetors. They also feature precision-rolled threads, which prevent galling, while promoting more consistent torque loading. No provision for exhaust heated chokes and no exhaust crossover. Ford v8’s, the rpm air-gap intake manifold incorporates the same race-winning technology that’s been used on our victor series competition intakes for decades. The air-gap® design features an open air space that separates the runners from the hot engine oil resulting in a cooler, denser charge for more power. D. This listing is for a small block ford intake kit for the 260/289/302.

 

Edelbrock 8103 ProClassic Fuel Hose Complete Fuel Pump To Carb Fuel Hose wCompetition Fuel Filter With 38in NPT To 58in-20 Fuel Inlet on Edelbrock Performer and Thunder Series AVS Carbs ProClassic Fuel Hose #ad

Edelbrock 8103 ProClassic Fuel Hose Complete Fuel Pump To Carb Fuel Hose w/Competition Fuel Filter With 3/8in. NPT To 5/8in.-20 Fuel Inlet on Edelbrock Performer and Thunder Series AVS Carbs ProClassic Fuel Hose

Edelbrock 8103 ProClassic Fuel Hose Complete Fuel Pump To Carb Fuel Hose w/Competition Fuel Filter With 3/8in. NPT To 5/8in.-20 Fuel Inlet on Edelbrock Performer and Thunder Series AVS Carbs ProClassic Fuel Hose #ad - They are manufactured with russell proclassic hose and include fuel filter, 5/8″ -20 banjo bolt and gaskets. Will work with oem or equivalent fuel pumps. These high-quality fuel line kits offer a clean and precise fuel supply line for mechanical fuel pumps with 3/8″ npt to the 5/8″ -20 fuel inlet on edelbrock performer series and thunder series avs carbs.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.