17 Best Copper Nickel Brake Lines

 

Marsflex 25’ of 38’’ Copper Nickel Tubing Coil for Brake Transmission and Fuel Lines 38

Marsflex 25’ of 3/8’’ Copper Nickel Tubing Coil for Brake, Transmission and Fuel Lines (3/8″)

Marsflex 25’ of 3/8’’ Copper Nickel Tubing Coil for Brake, Transmission and Fuel Lines (3/8″) - Extremely easy to bend by hand and flare by simple tools. Also suitable for a broad variety of household, industrial and commercial uses. C70600 material includes 90% copper and 10% nickel, won’t rust. It meets sae and relative international standards. Replicate any automotive metal tube on the spot with non-corrosive tubing that will last a lifetime.

 

316 Copper Nickel Brake Lines PACK OF 3 Each pc Is 14 long with inverted double flares and standard 316 tube nuts

3/16″ Copper Nickel Brake Lines. PACK OF 3. Each pc. Is 14″ long with inverted double flares and standard 3/16″ tube nuts

3/16″ Copper Nickel Brake Lines. PACK OF 3. Each pc. Is 14″ long with inverted double flares and standard 3/16″ tube nuts - Includes 2 unions for coupling. Inverted double flare on each end w/ standard 3/16″ fittings (3/8″-24 fittings). 3, 14″ pieces of 3/16″ copper nickel. Over 3 feet of tubing. Will never rust.

 

Copper Nickel Brake Line Tubing Kit 316 OD 25 Foot Coil Roll all Size Fittings L-5-4  L-3-2

Copper Nickel Brake Line Tubing Kit 3/16 OD 25 Foot Coil Roll all Size Fittings (L-5-4 + L-3-2)

Copper Nickel Brake Line Tubing Kit 3/16 OD 25 Foot Coil Roll all Size Fittings (L-5-4 + L-3-2) - Specifications inline tube steel brake line coil 3/16″ x 25 foot all inline tube tubing conforms to the following • wall thickness =. Easy to work with. Oem spec, automotive 3/16″ copper cupro nickel brake line 25′ coil, 1 roll & fpm01 brake line fittings 3/8-24, 7/16-24, 1/2-20, 9/16-18 (this is the most common standard fittings in the automotive industry). This is the softest tube on the market, bend by hand flare with any flare tool, even the cheapest lowest tool will still flare this tube. 028 (. This is one roll of 3/16 brake line. 028″ wall thickness so that it is easy to flare, bend and install. Worth the extra cost over zinc or stainless if you are bending your own with no experience. 70mm) • elongation in 2″ (50mm) = 14% • hardness (rockwell 30t scale) 35 • clean finish inside and out • leak and vibration resistance • specifications sae j527b din 74234 sae j1290 iso 4038 sae j1650 gm123m astm a254 yield strength 24,656 psi tensile strength 42,061 psi working pressure 4,500 psi burst pressure 17, 900 psi copper nickel. Used for all automotive applications,. It is manufactured by inline tube.

 

Complete Copper Nickel Brake Line Kit 50 Foot 14 and 316 Rolls w Fittings 16 Ft each 316 14 Stainless Steel Armor

Complete Copper Nickel Brake Line Kit. 50 Foot 1/4″ and 3/16″ Rolls w Fittings /16 Ft each 3/16″ & 1/4″ Stainless Steel Armor

Complete Copper Nickel Brake Line Kit. 50 Foot 1/4″ and 3/16″ Rolls w Fittings /16 Ft each 3/16″ & 1/4″ Stainless Steel Armor - Kit includes a 50 ft. For the 3/16″ tube there are a total of 19 fittings (12 x 3/8″-24, 3 x 7/16″-24, 2 x 1/2″-20 and 2 x 9/16″-18) for the 1/4″ tube there are 16 fittings included (12 x 7/16″-24, 2 x 1/2″-20 and 2 x 9/16″-18). This copper nickel brake line kit includes everything you need to plumb a great brake line set. Rolls of both 3/16″ and 1/4″ cupronickel brake line tubing, a 16 foot length of stainless steel gravel guard for both 1/4″ tube and 3/16″ tube (spring wrap to protect exposed areas of brake line) and a large assortment of the most common standard brake line fittings.

 

14 Copper Nickel Brake Line kit 5 different lengths Double Flared w Standard 14 tube nuts

1/4″ Copper Nickel Brake Line kit. 5 different lengths Double Flared w/ Standard 1/4 tube nuts

1/4″ Copper Nickel Brake Line kit. 5 different lengths Double Flared w/ Standard 1/4 tube nuts - Includes 4-unions, 5 flared tubes over 15 feet of tubing. Will never rust. 1 of each length included 72″, 60″, 56″, 14″, & 8″. Coiled for shipping. Inverted double flare on each end w/standard 1/4″ tube nuts (7/16″-24).

 

Copper Nickel Brake Line Tubing Kit 14 OD 25 Foot Coil Roll USA INLINE TUBE CN4 L-5-5

Copper Nickel Brake Line Tubing Kit 1/4 OD 25 Foot Coil Roll USA INLINE TUBE CN4 (L-5-5)

Copper Nickel Brake Line Tubing Kit 1/4 OD 25 Foot Coil Roll USA INLINE TUBE CN4 (L-5-5) - Easy to work with. Used for all automotive applications,. Worth the extra cost over zinc or stainless if you are bending your own with no experience. 028″ wall thickness so that it is easy to flare, bend and install. It is manufactured by inline tube. This is the softest tube on the market, bend by hand flare with any flare tool, even the cheapest lowest tool will still flare this tube. Yield strength 24,656 psi tensile strength 42,061 psi working pressure 4,500 psi burst pressure 17, 900 psi copper nickel.

 

AAS Copper Nickel Tubing CN-316 316 x 25 Brake Line with 15 Metric Inverted Flare Fittings

AAS Copper Nickel Tubing CN-316 3/16″ x 25′ Brake Line with 15 Metric Inverted Flare Fittings

AAS Copper Nickel Tubing CN-316 3/16″ x 25′ Brake Line with 15 Metric Inverted Flare Fittings - Kit includes 1, 3/16″ od x 25′ roll of copper nickel brake line and 15 fittings. 10 tube nuts and 5 unions all metric inverted flare. 88% copper, 10% nickel, 2% iron. Aas copper nickel brake line meets sae 1677 standards, dot approved. Extremely pliable, easy flaring and bending, will not rust.

 

25 Ft Roll Coil of 316 OD Copper Nickel Brake Line Tubing Kit With FittingsGold

25 Ft. Roll Coil of 3/16″ OD Copper Nickel Brake Line Tubing Kit With Fittings(Gold)

25 Ft. Roll Coil of 3/16″ OD Copper Nickel Brake Line Tubing Kit With Fittings(Gold) - It is also widely suitable for household, industrial and commercial uses. 25 ft roll x 3/16″ od copper nickel brake line tubing with 15 assort fittings. It won’t rust,corrosion resistance,extremely easy to bend by hand and flare by simple tools. It includes sae flare nuts and meets relative international standards. Packing included1 piece 25 ft roll brake line tubing,5 pieces 083inch nut,10 pieces 055inch nut.

 

316 Copper Nickel Brake Lines PACK OF 3 Each pc Is 40 long with inverted double flares and standard 316 tube nuts

3/16″ Copper Nickel Brake Lines. PACK OF 3. Each pc. Is 40″ long with inverted double flares and standard 3/16″ tube nuts

3/16″ Copper Nickel Brake Lines. PACK OF 3. Each pc. Is 40″ long with inverted double flares and standard 3/16″ tube nuts - Includes 2 unions for coupling. 3, 40″ pieces of 3/16″ copper nickel. 10 feet of tubing, will never rust. Inverted double flare on each end w/ standard 3/16″ fittings (3/8″-24 fittings). Coiled for shipping.

 

25 Ft of 316 475 mm Copper Nickel Brake Line with Fittings

25 Ft. of 3/16″ (4.75 mm) Copper Nickel Brake Line with Fittings

25 Ft. of 3/16″ (4.75 mm) Copper Nickel Brake Line with Fittings - There are a total of 19 fittings (12 x 3/8″-24, 3 x 7/16″-24, 2 x 1/2″-20 and 2 x 9/16″-18. Finally you can order all the necessary components to bend a great brake lines in one kit. Kit includes25 foot roll of 3/16″ copper nickel tubing and 19 of the most common brake line fittings.

 

Copper Nickel Brake Line Tubing Kit 316 and 14 25 Ft Coil Rolls With Fittings L-5-5  L-5-4

Copper Nickel Brake Line Tubing Kit 3/16 and 1/4 25 Ft Coil Rolls With Fittings (L-5-5 + L-5-4)

Copper Nickel Brake Line Tubing Kit 3/16 and 1/4 25 Ft Coil Rolls With Fittings (L-5-5 + L-5-4) - Worth the extra cost over zinc or stainless if you are bending your own with no experience. This is the softest tube on the market, bend by hand flare with any flare tool, even the cheapest lowest tool will still flare this tube. & (10) 7/16-24 fittings, tn12 ( the most common 1/4″ brake line fitting ) & 2 9/16-18 fittings, 2 1/-20 fittings for the master cylinder or valve. Oem spec, automotive 3/16″ 1/4″ copper cupro nickel brake line 25′ coil, 2 roll. It is manufactured by inline tube. Used for all automotive applications,. Easy to work with. (10) 3/8-24 tn01, (2) 7/16-24 tn06, (2) 1/2-20 tn04, (2) 9/16-18 tn07, 25′ of copper nickel tube. 028″ wall thickness so that it is easy to flare, bend and install. This is one roll of 1/4 / 3/16 brake line. All the size fittings to plumb any car or truck in 3/16 1/4″ tubing.

 

25 Ft Roll  Coil of 316 Copper Nickel Brake Line Tubing

25 Ft. Roll / Coil of 3/16″ Copper Nickel Brake Line Tubing

25 Ft. Roll / Coil of 3/16″ Copper Nickel Brake Line Tubing - Most bends won’t even require a bending tool. This brake line tubing is the best on the market for extremely easy bending and flaring.

 

Copper Nickel Brake Line Tubing Kit 316 and 14 25 Ft Coil Rolls With Fittings L-5-4  L-5-5  L-3-2  L-3-2

Copper Nickel Brake Line Tubing Kit 3/16 and 1/4 25 Ft Coil Rolls With Fittings (L-5-4 + L-5-5 + L-3-2 + L-3-2)

Copper Nickel Brake Line Tubing Kit 3/16 and 1/4 25 Ft Coil Rolls With Fittings (L-5-4 + L-5-5 + L-3-2 + L-3-2) - (10) 3/8-24 tn01, (2) 7/16-24 tn06, (2) 1/2-20 tn04, (2) 9/16-18 tn07, 25′ of copper nickel tube. Easy to work with. Used for all automotive applications,. 028″ wall thickness so that it is easy to flare, bend and install. 028 (. This is one roll of 1/4 / 3/16 brake line. This is the softest tube on the market, bend by hand flare with any flare tool, even the cheapest lowest tool will still flare this tube. Specifications inline tube steel brake line coil 3/16 & 1/4″ x 25 foot all inline tube tubing conforms to the following • wall thickness =. & (10) 7/16-24 fittings, tn12 ( the most common 1/4″ brake line fitting ) & 2 9/16-18 fittings, 2 1/-20 fittings for the master cylinder or valve. Cn4/cn3, oem spec, automotive 3/16″ 1/4″ copper cupro nickel brake line 25′ coil, 2 roll. 70mm) • elongation in 2″ (50mm) = 14% • hardness (rockwell 30t scale) 35 • clean finish inside and out • leak and vibration resistance • specifications sae j527b din 74234 sae j1290 iso 4038 sae j1650 gm123m astm a254 yield strength 24,656 psi tensile strength 42,061 psi working pressure 4,500 psi burst pressure 17, 900 psi copper nickel. All the size fittings to plumb any car or truck in 3/16 1/4″ tubing. Worth the extra cost over zinc or stainless if you are bending your own with no experience. It is manufactured by inline tube.

 

Copper Nickel Brake Line Tubing Kit 316 OD 25 Foot Coil Roll Metric Fittings L-5-4  D-3-11

Copper Nickel Brake Line Tubing Kit 3/16 OD 25 Foot Coil Roll & Metric Fittings (L-5-4 + D-3-11)

Copper Nickel Brake Line Tubing Kit 3/16 OD 25 Foot Coil Roll & Metric Fittings (L-5-4 + D-3-11) - 028 (. This is one roll of 3/16 brake line. It is manufactured by inline tube. Easy to work with. 70mm) • elongation in 2″ (50mm) = 14% • hardness (rockwell 30t scale) 35 • clean finish inside and out • leak and vibration resistance • specifications sae j527b din 74234 sae j1290 iso 4038 sae j1650 gm123m astm a254 yield strength 24,656 psi tensile strength 42,061 psi working pressure 4,500 psi burst pressure 17, 900 psi copper nickel. 0 tn24 brake line fittings (this is the most common metric fitting in the automotive industry). Specifications inline tube steel brake line coil 3/16″ x 25 foot all inline tube tubing conforms to the following • wall thickness =. 028″ wall thickness so that it is easy to flare, bend and install. Used for all automotive applications,. This is the softest tube on the market, bend by hand flare with any flare tool, even the cheapest lowest tool will still flare this tube. Cn3, oem spec, automotive 3/16″ copper cupro nickel brake line 25′ coil, 1 roll & 15 metric 10mmx1. Worth the extra cost over zinc or stainless if you are bending your own with no experience.

 

Copper Nickel Brake Line Tubing Kit 316 OD 25 Foot Coil Roll Fittings Spring 47 L-5-4  L-3-2  L-3-7

Copper Nickel Brake Line Tubing Kit 3/16 OD 25 Foot Coil Roll Fittings Spring 47 (L-5-4 + L-3-2 + L-3-7)

Copper Nickel Brake Line Tubing Kit 3/16 OD 25 Foot Coil Roll Fittings Spring 47 (L-5-4 + L-3-2 + L-3-7) - This is one roll of 3/16 brake line. 70mm) • elongation in 2″ (50mm) = 14% • hardness (rockwell 30t scale) 35 • clean finish inside and out • leak and vibration resistance • specifications sae j527b din 74234 sae j1290 iso 4038 sae j1650 gm123m astm a254 yield strength 24,656 psi tensile strength 42,061 psi working pressure 4,500 psi burst pressure 17, 900 psi copper nickel. 5 red tn30 this fittings are for 3/16 brake line 45 degree double flare and the metric bubble flare (iso). It is manufactured by inline tube. Used for all automotive applications,. Easy to work with. Specifications inline tube steel brake line coil 3/16″ x 25 foot all inline tube tubing conforms to the following • wall thickness =. 028 (. 0 blue tn27 (2) 13mmx1. (12) 3/8-24 gold tn01 (3) 7/16-24 red tn06 (2) 1/2-20 black tn04 (2) 9/16-18 olive tn07 (12) 10mmx1. Oem spec, automotive 3/16″ copper cupro nickel brake line 25′ coil, 1 roll, 8 ft of stainless spring wrap gravel guard fpm10 brake line fitting pack. 5 gold tn26 (2) 12mmx1. Worth the extra cost over zinc or stainless if you are bending your own with no experience. 028″ wall thickness so that it is easy to flare, bend and install. This is the softest tube on the market, bend by hand flare with any flare tool, even the cheapest lowest tool will still flare this tube. 0 blue tn24 (2) 11mmx1. 0 blue tn72 (10) 10mmx1.

 

316 Copper Nickel Brake Lines PACK OF 3 Each pc Is 66 long with inverted double flares and standard 316 tube nuts

3/16″ Copper Nickel Brake Lines. PACK OF 3. Each pc. Is 66″ long with inverted double flares and standard 3/16″ tube nuts

3/16″ Copper Nickel Brake Lines. PACK OF 3. Each pc. Is 66″ long with inverted double flares and standard 3/16″ tube nuts - Over 16 feet of tubing, will never rust. Includes 2 unions for coupling. Coiled for shipping. Inverted double flare on each end w/ standard 3/16″ fittings (3/8″-24 fittings). 3, 66″ pieces of 3/16″ copper nickel.

 

AAS Copper Nickel Brake Line CN-414 14 X 25

AAS Copper Nickel Brake Line CN-414 1/4″ X 25′

AAS Copper Nickel Brake Line CN-414 1/4″ X 25′ - Will not rust. Extremely pliable, easy flaring and bending. 88% copper, 10% nickel, 2% iron. Aas copper nickel brake line. 1/4″ x 25′.