19 Top Dodge Ram Lift Kits

 

Supreme Suspensions - Dodge Ram 1500 Lift Kit 4WD 2 - 25 Rear Suspension Lift Carbon Steel Add-A-Leaf Kit 36 Long  U-Bolts #ad

Supreme Suspensions – Dodge Ram 1500 Lift Kit 4WD 2″ – 2.5″ Rear Suspension Lift Carbon Steel Add-A-Leaf Kit (36″ Long) + U-Bolts

Supreme Suspensions – Dodge Ram 1500 Lift Kit 4WD 2″ – 2.5″ Rear Suspension Lift Carbon Steel Add-A-Leaf Kit (36″ Long) + U-Bolts #ad - Technical notes easy ‘bolt-on’ installation takes 1 to 2 hours no special tools are required an alignment is recommended after install. Fitment 1994, 2001 dodge ram 1500 (4wd) only fits models with single-pin leaf packs and without factory overloads. Lift height this add-a-leaf kit will lift the rear between 2 and 25 inches, depending on the condition of the factory leaf packs it will also increase your spring rate and diminish sag while riding under heavy loads. 4x zinc-plated u-bolts new u-bolts eliminate flexing of the leaf spring packs and provide the desired spring stiffness for your vehicle our extended zinc-plated u-bolts restore this clamping force on your spring assembly, maximizing safety and ensuring that you get the most out of your rear lift. 2x add-a-leafs supreme suspensions add-a-leafs are constructed from heat-treated, tempered steel and can be added to your existing leaf spring packs to increase load and towing capacity, minimize squat, and allow for larger custom rims and tires.

 

MotoFab Lifts DR-25 - 25 Front Leveling Lift Kit That Will Raise The Front Of Your Dodge Ram Pickup 25 #ad

MotoFab Lifts DR-2.5 – 2.5″ Front Leveling Lift Kit That Will Raise The Front Of Your Dodge Ram Pickup 2.5″

MotoFab Lifts DR-2.5 – 2.5″ Front Leveling Lift Kit That Will Raise The Front Of Your Dodge Ram Pickup 2.5″ #ad - Motofab lifts are cnc machined out of billet aluminum then powdercoated black to match your factory suspension. Can be installed in about 1 1/2-2 hours and does not require strut/coil disassembly like other kits. Will raise the front of your truck by a true 25″. Fits 2006-2018 dodge ram 1500 4wd (does not fit 2wd). Made in the usa with a lifetime warranty.

 

MotoFab Lifts DR25-2WD-25 Front Leveling Lift Kit That Will Raise The Front Of Your 2wd Dodge Ram Pickup 25 #ad

MotoFab Lifts DR2.5-2WD-2.5″ Front Leveling Lift Kit That Will Raise The Front Of Your 2wd Dodge Ram Pickup 2.5″

MotoFab Lifts DR2.5-2WD-2.5″ Front Leveling Lift Kit That Will Raise The Front Of Your 2wd Dodge Ram Pickup 2.5″ #ad - Motofab lifts are cnc machined out of billet aluminum. Can be installed in about 1 1/2-2 hours. Made in the usa with a lifetime warranty. Will raise the front of your truck by a true 25″. Fits 1994-2018 dodge ram 1500 2500 3500 2wd (does not fit 4wd).

 

MotoFab Lifts DR-3F-15R - 3 Front And 15 Rear Lift Kit For Dodge Ram Pickup #ad

MotoFab Lifts DR-3F-1.5R – 3″ Front And 1.5″ Rear Lift Kit For Dodge Ram Pickup

MotoFab Lifts DR-3F-1.5R – 3″ Front And 1.5″ Rear Lift Kit For Dodge Ram Pickup #ad - Made in the usa. Lifetime warranty. Can be installed in about 1 1/2-2 hours and does not require strut/coil disassembly like other kits. Motofab lifts are cnc machined out of billet aluminum then powdercoated black to match your factory suspension. Will lift the front of your truck 3″ and the rear 15″.

 

Supreme Suspensions - Dodge Ram 2500 3500 Lift Kit 4WD Overloads 2 - 25 Rear Suspension Lift Carbon Steel Add-A-Leaf Kit 36 Long  U-Bolts for 4 Axles #ad

Supreme Suspensions – Dodge Ram 2500 3500 Lift Kit 4WD Overloads 2″ – 2.5″ Rear Suspension Lift Carbon Steel Add-A-Leaf Kit (36″ Long) + U-Bolts for 4″ Axles

Supreme Suspensions – Dodge Ram 2500 3500 Lift Kit 4WD Overloads 2″ – 2.5″ Rear Suspension Lift Carbon Steel Add-A-Leaf Kit (36″ Long) + U-Bolts for 4″ Axles #ad - Lift height this add-a-leaf kit will lift the rear between 2 and 25 inches, depending on the condition of the factory leaf packs it will also increase your spring rate and diminish sag while riding under heavy loads. Fitment 2003, 2012 dodge ram 2500 3500 (4wd) only fits models with single-pin leaf packs, 4″ axles, and factory overloads. Technical notes easy ‘bolt-on’ installation takes 1 to 2 hours no special tools are required an alignment is recommended after install. 2x add-a-leafs supreme suspensions add-a-leafs are constructed from heat-treated, tempered steel and can be added to your existing leaf spring packs to increase load and towing capacity, minimize squat, and allow for larger custom rims and tires. 4x zinc-plated u-bolts new u-bolts eliminate flexing of the leaf spring packs and provide the desired spring stiffness for your vehicle our extended zinc-plated u-bolts restore this clamping force on your spring assembly, maximizing safety and ensuring that you get the most out of your rear lift.

 

Supreme Suspensions - Dodge Ram Lift Kit Mega Cab 3 Front Suspension Lift CNC Machined High Strength Delrin Ram Leveling Kit 1500 4WD 4x4 Black PRO #ad

Supreme Suspensions – Dodge Ram Lift Kit Mega Cab 3″ Front Suspension Lift CNC Machined High Strength Delrin Ram Leveling Kit 1500 4WD 4×4 (Black) PRO

Supreme Suspensions – Dodge Ram Lift Kit Mega Cab 3″ Front Suspension Lift CNC Machined High Strength Delrin Ram Leveling Kit 1500 4WD 4×4 (Black) PRO #ad - Supreme suspensions lift spacers are cnc machined from delrin blocks which provide exceptional strength without compromising ride quality. Unlike traditional polyurethane spacers, these spacers will not compress under load. No special tools are required. This lift kit for ram retains your smooth factory ride quality and you can reuse your factory shocks. As a mega cab ram lift kit, it’s the fastest and easiest to install to increase ride height and ground clearance, so you can fit larger custom rims and tires. This ram 1500 lift kit includes 2x front delrin coil spacers, installation hardware, installation instructions and supreme suspensions pro pack. Installation takes 1-2 hours. It is designed only for mega cab models. An alignment is always recommended after altering the height of your vehicle. This supreme suspensions ram leveling kit is precision engineered to provide a full 3 inch front suspension lift for the ram 1500 4wd.

 

MotoFab Lifts DR-1R - 1 Rear Lift Kit That Will Lift The Rear Of Your Dodge Ram Pickup 1 #ad

MotoFab Lifts DR-1R – 1″ Rear Lift Kit That Will Lift The Rear Of Your Dodge Ram Pickup 1″

MotoFab Lifts DR-1R – 1″ Rear Lift Kit That Will Lift The Rear Of Your Dodge Ram Pickup 1″ #ad - Fits 2009-2018 dodge ram 1500 4wd and 2wd. Will lift the rear of your truck by a true 1″. Motofab lifts are cnc machined out of billet aluminum then powdercoated black to match your factory suspension. Made in the usa and comes with a lifetime warranty. Can be installed in about 1 1/2-2 hours.

 

Supreme Suspensions - Dodge Ram 1500 Lift Kit 4WD Mega Cab Overloads 2 - 25 Rear Suspension Lift Carbon Steel Add-A-Leaf Kit 36 Long  U-Bolts for 4 Axles #ad

Supreme Suspensions – Dodge Ram 1500 Lift Kit 4WD Mega Cab Overloads 2″ – 2.5″ Rear Suspension Lift Carbon Steel Add-A-Leaf Kit (36″ Long) + U-Bolts for 4″ Axles

Supreme Suspensions – Dodge Ram 1500 Lift Kit 4WD Mega Cab Overloads 2″ – 2.5″ Rear Suspension Lift Carbon Steel Add-A-Leaf Kit (36″ Long) + U-Bolts for 4″ Axles #ad - Technical notes easy ‘bolt-on’ installation takes 1 to 2 hours no special tools are required an alignment is recommended after install. Fitment 2003, 2008 dodge ram 1500 mega cab (4wd) only fits models with single-pin leaf packs, 4″ axles, and factory overloads. Lift height this add-a-leaf kit will lift the rear between 2 and 25 inches, depending on the condition of the factory leaf packs it will also increase your spring rate and diminish sag while riding under heavy loads. 4x zinc-plated u-bolts new u-bolts eliminate flexing of the leaf spring packs and provide the desired spring stiffness for your vehicle our extended zinc-plated u-bolts restore this clamping force on your spring assembly, maximizing safety and ensuring that you get the most out of your rear lift. 2x add-a-leafs supreme suspensions add-a-leafs are constructed from heat-treated, tempered steel and can be added to your existing leaf spring packs to increase load and towing capacity, minimize squat, and allow for larger custom rims and tires.

 

MotoFab Lifts DR-3 - 3 Front Leveling Lift Kit That Will Raise The Front Of Your Dodge Ram Pickup 3 #ad

MotoFab Lifts DR-3 – 3″ Front Leveling Lift Kit That Will Raise The Front Of Your Dodge Ram Pickup 3″

MotoFab Lifts DR-3 – 3″ Front Leveling Lift Kit That Will Raise The Front Of Your Dodge Ram Pickup 3″ #ad - Fits 2006-2018 dodge ram 1500 4wd (does not fit 2wd). Made in the usa with a lifetime warranty. Can be installed in about 1 1/2-2 hours and does not require strut/coil disassembly like other kits. Motofab lifts are cnc machined out of billet aluminum then powdercoated black to match your factory suspension. Will raise the front of your truck by a true 3″.

 

Supreme Suspensions - Dodge Ram Lift Kit 2500 3 Front Suspension Lift CNC Machined High Strength Delrin Ram Leveling Kit 2500 4WD 4x4 Black PRO #ad

Supreme Suspensions – Dodge Ram Lift Kit 2500 3″ Front Suspension Lift CNC Machined High Strength Delrin Ram Leveling Kit 2500 4WD 4×4 (Black) PRO

Supreme Suspensions – Dodge Ram Lift Kit 2500 3″ Front Suspension Lift CNC Machined High Strength Delrin Ram Leveling Kit 2500 4WD 4×4 (Black) PRO #ad - This lift kit for ram retains your smooth factory ride quality and you can reuse your factory shocks. This supreme suspensions ram 2500 leveling kit is precision engineered to provide a full 3 inch front suspension lift for the ram 2500 4wd. Installation takes 1-2 hours. As a ram 2500 lift kit, it’s the fastest and easiest to install to increase ride height and ground clearance, so you can fit larger custom rims and tires. This ram 2500 lift kit includes 2x front delrin coil spacers, installation hardware, installation instructions and supreme suspensions pro pack. An alignment is always recommended after altering the height of your vehicle. Unlike traditional polyurethane spacers, these spacers will not compress under load. Supreme suspensions lift spacers are cnc machined from delrin blocks which provide exceptional strength without compromising ride quality. No special tools are required.

 

Supreme Suspensions - Dodge Ram 1500 Lift Kit 4WD Mega Cab 2 - 25 Rear Suspension Lift Carbon Steel Add-A-Leaf Kit 36 Long  U-Bolts for 4 Axles #ad

Supreme Suspensions – Dodge Ram 1500 Lift Kit 4WD Mega Cab 2″ – 2.5″ Rear Suspension Lift Carbon Steel Add-A-Leaf Kit (36″ Long) + U-Bolts for 4″ Axles

Supreme Suspensions – Dodge Ram 1500 Lift Kit 4WD Mega Cab 2″ – 2.5″ Rear Suspension Lift Carbon Steel Add-A-Leaf Kit (36″ Long) + U-Bolts for 4″ Axles #ad - Lift height this add-a-leaf kit will lift the rear between 2 and 25 inches, depending on the condition of the factory leaf packs it will also increase your spring rate and diminish sag while riding under heavy loads. 2x add-a-leafs supreme suspensions add-a-leafs are constructed from heat-treated, tempered steel and can be added to your existing leaf spring packs to increase load and towing capacity, minimize squat, and allow for larger custom rims and tires. Technical notes easy ‘bolt-on’ installation takes 1 to 2 hours no special tools are required an alignment is recommended after install. 4x zinc-plated u-bolts new u-bolts eliminate flexing of the leaf spring packs and provide the desired spring stiffness for your vehicle our extended zinc-plated u-bolts restore this clamping force on your spring assembly, maximizing safety and ensuring that you get the most out of your rear lift. Fitment 2003, 2008 dodge ram 1500 mega cab (4wd) only fits models with single-pin leaf packs and 4″ axles, and without factory overloads.

 

TGC 2145107 Dodge Ram 1500 4x4 175 Inch Suspension Lift Kit #ad

TGC 2145107 Dodge Ram 1500 4×4 1.75 Inch Suspension Lift Kit

TGC 2145107 Dodge Ram 1500 4×4 1.75 Inch Suspension Lift Kit #ad - Kit contains • (2) rear coil spacers • detailed instructions • shocks are not included in this kit. These are manufactured in house by top gun customz , which allows us to offer them at a reasonable price. Ride quality is unchanged. Because of that, our spacers are made out of steel. These will lift the rear of your truck approximately 1. Kit comes with 2 spacers. They take as little as 20 minutes to install. They are super easy to install and do not require modifications such as drilling, etc. These things are indestructible • most customers perform the install themselves • retains the stock rubber coil spring isolator • maintains factory ride • guaranteed forever notes vehicle pictured is shown with top gun customz 2″ front strut spacer with top gun customz 3/4″ rear coil spacer. We developed these because of their high demand. Kit features • these spacers are made from super heavy duty 1/4″ thick laser cut steel. Accompanying image is for illustrative purposes only. 75″. Only the highest quality materials are used for these spacers. These are installed at the top of the coil springs and do re-use the factory isolator.

 

Bilstein Shocks 5100 Series  Full Ram 1500 Lift Kit 3 Front Lift Coil Spring Spacers  3 Rear Lift Billet Blocks PRO Supreme Suspensions Dodge Ram Lift Kit #ad

Bilstein Shocks 5100 Series + Full Ram 1500 Lift Kit 3″ Front Lift Coil Spring Spacers + 3″ Rear Lift Billet Blocks PRO Supreme Suspensions Dodge Ram Lift Kit

Bilstein Shocks 5100 Series + Full Ram 1500 Lift Kit 3″ Front Lift Coil Spring Spacers + 3″ Rear Lift Billet Blocks PRO Supreme Suspensions Dodge Ram Lift Kit #ad - Technical notes easy ‘bolt-on’ installation takes 3 to 4 hours no modification is required an alignment is recommended after install. Full ram lift kit supreme suspensions ram 1500 suspension lift products are meticulously crafted to work in conjunction with bilstein shock absorbers and are guaranteed to withstand the toughest, most extreme environments this kit comes complete with 4x bilstein 5100 shocks, 2x front lift high crystalline delrin spring spacers, 2x rear lift aircraft billet blocks, 4x extended zinc plated u-bolts, installation hardware, and installation instructions. Fitment 1994, 2001 dodge ram 1500 4wd. Bilstein shocks bilstein 5100 series shock absorbers feature a high gas pressure 46mm monotube construction with vehicle specific tuning for optimal handling performance their superior damping ability makes them the perfect complement to lifted trucks, allowing for heavy hauling or off-road use while maintaining a stable, controlled, and comfortable ride. Lift height 3 inch front suspension lift and 3 inch rear suspension lift.

 

Ram 1500 Leveling Kit YITAMOTOR 2” 2006-2017 Dodge Ram Leveling Kit for Dodge Ram 1500 Dakota Mitsubishi Raider Lift Kit Strut Spacers Suspension Kit #ad

Ram 1500 Leveling Kit, YITAMOTOR 2” 2006-2017 Dodge Ram Leveling Kit for Dodge Ram 1500 Dakota Mitsubishi Raider Lift Kit Strut Spacers Suspension Kit

Ram 1500 Leveling Kit, YITAMOTOR 2” 2006-2017 Dodge Ram Leveling Kit for Dodge Ram 1500 Dakota Mitsubishi Raider Lift Kit Strut Spacers Suspension Kit #ad - 【Increased safety】 machine-manufactured precisely from 6061-t6 aircraft-grade aluminum billet, with heat-treated and hardened 109 grade bolts pre-installed the anodized surface provides additional resistance to corrosion extraordinarily strong and light compared to spacers made of steel. 【Simple installation】the kit comes with everything needed for 100% simple bolt-on installation the process requires no strut pre-loading, cutting, or modifying any factory parts, can be finished within 2 hours. 【Fitment】 2006, 2017 dodge ram 1500 (4wd only, not fit mega cab models ), 2005, 2011 dodge dakota (2wd/4wd), 2006, 2009 mitsubishi raider (2wd/4wd) 【note the thickness of kit doesn’t equal to the lift height due to suspension geometry】. 【benefits】eliminates factory rake and perfectly levels the front with the rear of the vehicle gives a noticeably aggressive look to your truck provides additional fender clearance for larger tires and wheels maintains your original oem ride quality, steering quality and driving comfort. 【After-sales service】 2-years warranty contact our friendly, helpful, and knowledgeable customer service representatives if you have any questions, we will be glad to address any questions or concerns promptly.

 

TGC 2862314 Dodge Ram 1500 2500 3500 4x4 35 Inch Suspension Lift Kit #ad

TGC 2862314 Dodge Ram 1500, 2500, 3500 4×4 3.5 Inch Suspension Lift Kit

TGC 2862314 Dodge Ram 1500, 2500, 3500 4×4 3.5 Inch Suspension Lift Kit #ad - S. Ask us about adding lift spacers to your existing lift kit for even more lift height the truck featured in the second image used our lift spacers to go even higher also, check out our dual shock brackets an easy upgrade when installing your lift spacers. Stock shocks cannot be used new shocks are required features • only lift spacers to receive “now patented” status from the u. Patent office because of their superior design • add style & function to your truckmade from heavy duty, 1/4″ thick steel • computer designedlaser cut • does not affect ride quality • guaranteed forever • black finish • zinc plated hardware • detailed instructions included. Our patented manufacturing process has allowed us make an extremely rugged spacer at an affordable price these spacers are welded in house here at top gun customz. Note these will not fit 2wd vehicles or 2002 and newer 1500 models if you have any questions about your truck’s suspension please contact us. Works with gas or diesel engines. The third image shown in this ad features our dual shock bracket, lift spacers, & reservoir mounts all of these items can be found in our online store.

 

MotoFab Lifts DR-3F-2R - 3 Front And 2 Rear Lift Kit For Dodge Ram Pickup #ad

MotoFab Lifts DR-3F-2R – 3″ Front And 2″ Rear Lift Kit For Dodge Ram Pickup

MotoFab Lifts DR-3F-2R – 3″ Front And 2″ Rear Lift Kit For Dodge Ram Pickup #ad - Fits 4wd only does not fit 2wd. Will lift the front of your truck 3″ and the rear 2″. Motofab lifts are cnc machined out of billet aluminum then powdercoated black to match your factory suspension. Lifetime warranty made in the usa. Can be installed in about 1 1/2-2 hours and does not require strut/coil disassembly like other kits.

 

MotoFab Lifts DR-5 - 12 Front Leveling Lift Kit That Will Raise The Front Of Your Dodge Ram Pickup 12 #ad

MotoFab Lifts DR-5 – 1/2″ Front Leveling Lift Kit That Will Raise The Front Of Your Dodge Ram Pickup 1/2″

MotoFab Lifts DR-5 – 1/2″ Front Leveling Lift Kit That Will Raise The Front Of Your Dodge Ram Pickup 1/2″ #ad - Will raise the front of your truck by a true 1/2″. Motofab lifts are cnc machined out of billet aluminum then powdercoated black to match your factory suspension. Fits 2006-2018 dodge ram 1500 4wd (does not fit 2wd). Can be installed in about 1 1/2-2 hours and does not require strut/coil disassembly like other kits. Made in the usa and come with a lifetime warranty.

 

Supreme Suspensions - Dodge Ram 2500 3500 Lift Kit 4WD 2 - 25 Rear Suspension Lift Carbon Steel Add-A-Leaf Kit 36 Long  U-Bolts for 4 Axles #ad

Supreme Suspensions – Dodge Ram 2500 3500 Lift Kit 4WD 2″ – 2.5″ Rear Suspension Lift Carbon Steel Add-A-Leaf Kit (36″ Long) + U-Bolts for 4″ Axles

Supreme Suspensions – Dodge Ram 2500 3500 Lift Kit 4WD 2″ – 2.5″ Rear Suspension Lift Carbon Steel Add-A-Leaf Kit (36″ Long) + U-Bolts for 4″ Axles #ad - 4x zinc-plated u-bolts new u-bolts eliminate flexing of the leaf spring packs and provide the desired spring stiffness for your vehicle our extended zinc-plated u-bolts restore this clamping force on your spring assembly, maximizing safety and ensuring that you get the most out of your rear lift. Technical notes easy ‘bolt-on’ installation takes 1 to 2 hours no special tools are required an alignment is recommended after install. 2x add-a-leafs supreme suspensions add-a-leafs are constructed from heat-treated, tempered steel and can be added to your existing leaf spring packs to increase load and towing capacity, minimize squat, and allow for larger custom rims and tires. Lift height this add-a-leaf kit will lift the rear between 2 and 25 inches, depending on the condition of the factory leaf packs it will also increase your spring rate and diminish sag while riding under heavy loads. Fitment 2003, 2012 dodge ram 2500 3500 (4wd) only fits models with single-pin leaf packs and 4″ axles, and without factory overloads.

 

Supreme Suspensions - Dodge Ram 2500 3500 Lift Kit 4WD Overloads 2 - 25 Rear Suspension Lift Carbon Steel Add-A-Leaf Kit 36 Long  U-Bolts #ad

Supreme Suspensions – Dodge Ram 2500 3500 Lift Kit 4WD Overloads 2″ – 2.5″ Rear Suspension Lift Carbon Steel Add-A-Leaf Kit (36″ Long) + U-Bolts

Supreme Suspensions – Dodge Ram 2500 3500 Lift Kit 4WD Overloads 2″ – 2.5″ Rear Suspension Lift Carbon Steel Add-A-Leaf Kit (36″ Long) + U-Bolts #ad - Fitment 1994, 2002 dodge ram 2500 3500 (4wd) only fits models with single-pin leaf packs and factory overloads. Lift height this add-a-leaf kit will lift the rear between 2 and 25 inches, depending on the condition of the factory leaf packs it will also increase your spring rate and diminish sag while riding under heavy loads. 4x zinc-plated u-bolts new u-bolts eliminate flexing of the leaf spring packs and provide the desired spring stiffness for your vehicle our extended zinc-plated u-bolts restore this clamping force on your spring assembly, maximizing safety and ensuring that you get the most out of your rear lift. 2x add-a-leafs supreme suspensions add-a-leafs are constructed from heat-treated, tempered steel and can be added to your existing leaf spring packs to increase load and towing capacity, minimize squat, and allow for larger custom rims and tires. Technical notes easy ‘bolt-on’ installation takes 1 to 2 hours no special tools are required an alignment is recommended after install.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.