21 Best and Coolest Bass Blockers

 

PAC BB-4PR Pair of 4 Bass Blocker #ad

PAC BB-4PR Pair of 4″ Bass Blocker

PAC BB-4PR Pair of 4″ Bass Blocker #ad - Encased in heat shrink tubing with wire leads for easy installation. Pair of bass blockers. Removes selected frequencies from the audio source. Easily handles power of up to 50 watts. Protects the speakers from receiving damaging frequencies. Frequencies blocked 4 ohms 0-1200 hz / 8 ohms 0-600 hz. Orange color coded leads for easy identification. Designed for use with 4″ speakers.

 

nippon Pair Audiopipe Bb14 Bass Blockers 35 Speakers 3 12 #ad

nippon Pair Audiopipe Bb14 Bass Blockers 3.5″ Speakers 3 1/2″

nippon Pair Audiopipe Bb14 Bass Blockers 3.5″ Speakers 3 1/2″ #ad - Nippon pair audiopipe bb14 bass blockers 35″ speakers 3 1/2″. 14 uf 28khz hz at 4 ohm. Quantity 2 packs (4 pieces). Non-poplar 10 percent cap. Good for 35″x4″ speakers.

 

Nippon bb199 Pair Audiopipe Bb199 Bass Blockers 10 Woofers #ad

Nippon bb199 Pair Audiopipe Bb199 Bass Blockers 10 Woofers

Nippon bb199 Pair Audiopipe Bb199 Bass Blockers 10 Woofers #ad - Audiop bb199. Pair audiopipe bb199 bass blockers 10 woofers. 1-year warranty. New, retail.

 

Skar Audio TX46 4x6 Coaxial 140W 2-Way Speakers 2 Pairs with 0-12Khz Bass Blockers and Stinger Roadkill #ad

Skar Audio TX46 4″x6″ Coaxial 140W 2-Way Speakers (2 Pairs) with 0-1.2Khz Bass Blockers and Stinger Roadkill

Skar Audio TX46 4″x6″ Coaxial 140W 2-Way Speakers (2 Pairs) with 0-1.2Khz Bass Blockers and Stinger Roadkill #ad - Skar audio 4″ x 6″ tx elite series 140w coaxial speakers. Easy to install, 4 sheets of stinger speaker roadkill included for an enhanced listening experience. Replaces vehicle’s factory speakers. Includes 2 pairs of speakers for a complete vehicle upgrade. 2 pairs of bb-4pr bass noise filters included to protect your 4″ x 6″ speakers from harmful low frequencies.

 

Bass Blocker Audiopipe 28Khz In Line Quantity 9 #ad

Bass Blocker Audiopipe 2.8Khz In Line Quantity: 9

Bass Blocker Audiopipe 2.8Khz In Line Quantity: 9 #ad - Pair packed. Bass blocker audiopipe 28khz in line. 28khz at 4-ohm. Non-polar 10% compacitor.

 

Crutchfield 300Hz Bass Blocker pair #ad

Crutchfield 300Hz Bass Blocker pair

Crutchfield 300Hz Bass Blocker pair #ad - If you use 8-ohm speakers, the cut-off point is half the listed frequency. Each bass blocker handles up to 50 watts rms with a 6 db per octave roll-off. Eliminate bass distortion in your speakers protect your new car speakers from bass distortion and enjoy cleaner sound with crutchfield’s bass blockers. The listed cut-off points are at 4 ohms. Speaker size cut-off frequency 6-1/2″, 5″x7″/6″x8″, 150 hz 5-1/4″, 300 hz 3-1/2″, 4″, 4″x6″, 600 hz these models come fitted with easy-to-use quick-slide connectors that make installation a cinch, no splicing or crimping needed. If you use 2-ohm speakers, the cut-off point is double the listed frequency. Here are some general guidelines for matching bass blockers to speaker size.

 

Skar Audio TX65 65 and TX46 4x6 Coaxial Speaker Upgrade Package with Stinger Roadkill and 0-12Khz Bass Blockers #ad

Skar Audio TX65 6.5″ and TX46 4″x6″ Coaxial Speaker Upgrade Package with Stinger Roadkill and 0-1.2Khz Bass Blockers

Skar Audio TX65 6.5″ and TX46 4″x6″ Coaxial Speaker Upgrade Package with Stinger Roadkill and 0-1.2Khz Bass Blockers #ad - Includes 1 pair of tx65 and 1 pair of tx46 speakers for a complete vehicle upgrade. 1 pair of bb-4pr bass noise filters included to protect your 4″ x 6″ speakers from harmful low frequencies. Replaces vehicle’s factory speakers. Skar audio 65″ & 4″ x 6″ tx elite series coaxial speakers. Easy to install, 2 sheets of stinger speaker roadkill included for an enhanced listening experience.

 

PAC BB-5PR Pair of 35 Bass Blocker #ad

PAC BB-5PR Pair of 3.5″ Bass Blocker

PAC BB-5PR Pair of 3.5″ Bass Blocker #ad - Frequencies blocked 4 ohms 0-28 hz. Pair of bass blockers. Passive crossover designed for 35″ speakers. Used for removing bass from speakers to prevent damage. Filters out unwanted frequencies sent to the speakers.

 

Audiopipe Bass Blocker #ad

Audiopipe Bass Blocker

Audiopipe Bass Blocker #ad - For 6″ x 9″ speaker. Bass block/inline filter.

 

PAC BB-3 Bass Blocker 0-800Hz  4ohms 0-400Hz  8ohms #ad

PAC BB-3 Bass Blocker 0-800Hz @ 4ohms, 0-400Hz @ 8ohms

PAC BB-3 Bass Blocker 0-800Hz @ 4ohms, 0-400Hz @ 8ohms #ad - 5″, 5×7″, 6×8″, 150hz5″, 5. 8 khz0-1. 5″, 4″, 4×6″, 600hz (low power) (800hz for higher power)featureseasily handles power of up to 50 watts rmsleads are color coded to prevent misapplication6″ speaker wire at each end (terminated with a 1/4″ female slide connectoron one end and a male slide connector on the other)simple to use 6 db per octave roll-off  high-pass bass blockerencased in shrink tube with wire leads for easy installationuse them to protect your full-range, mid-bass, and mid-range speakers fromdistortion caused by low frequency outputfitted with easy-to-use quick-slide connectors to make installation a snapno splicing or crimping required, just slide one of the bass blocker’sconnectors onto your speaker harness and the other bass blocker connector ontoyour speaker’s positive terminal. Speaker size cut-off frequency guideline (speaker size & correspondingrecommended frequency)6. They aredesigned to enhance the performance and power handling of tweeters and midrangespeakers by removing frequencies beyond their capabilities. 2 khz0-600 khzorangebb-50-2. 25″, 300hz3. 4 khzredbb-60-5. Sold in eaches (one bass blocker, for one speaker). 8 khzblack. Bassblockers remove or “cut out” sounds that are below a certain frequency. If you like to crank up the volume, protect your speakers from low-frequencybass distortion and get cleaner sound with this bass blocker from pac. 6 khz0-2. Most applicationsrequire quantity 2 of this product. Bass blockers aretypically installed right before the positive speaker input terminal, in-linewith the positive speaker lead. Part#cutoff at 4ohmscutoff at 8ohmswire colorbb-10-300 hz0-150 hzbluebb-20-600 hz0-300 hzgreenbb-30-800 hz0-400 hzyellowbb-40-1.

 

Nippon Bass Blocker Pair Packed For 1 Or Bigger Tweeters Quantity 13 #ad

Nippon Bass Blocker Pair Packed For 1″ Or Bigger Tweeters Quantity: 13

Nippon Bass Blocker Pair Packed For 1″ Or Bigger Tweeters Quantity: 13 #ad - 8 ohm 0-150. Works well w/6×9 speakers. 100v 47uf for 1″ tweeters and above.

 

Bass Blocker Pac Sold Pair Quantity 4 #ad

Bass Blocker Pac Sold Pair Quantity: 4

Bass Blocker Pac Sold Pair Quantity: 4 #ad - Works well w/6×9 speakers. 4 ohm 0-300 hz. 8 ohm 0-150.

 

pac - bb3pr - bass blocker pac sold as pair #ad

pac – bb3pr – bass blocker pac sold as pair

pac – bb3pr – bass blocker pac sold as pair #ad - Bass blocker pac sold as pair bb3pr. Bass blocker audiopipe 28khz in line. Non-polar 10% compacitor. 28khz at 4-ohm.

 

PAC BB-4 Bass Blocker 0-12kHz  4ohms 0-600Hz  8ohms #ad

PAC BB-4 Bass Blocker 0-1.2kHz @ 4ohms, 0-600Hz @ 8ohms

PAC BB-4 Bass Blocker 0-1.2kHz @ 4ohms, 0-600Hz @ 8ohms #ad - 4 khzredbb-60-5. Bass blockers aretypically installed right before the positive speaker input terminal, in-linewith the positive speaker lead. They aredesigned to enhance the performance and power handling of tweeters and midrangespeakers by removing frequencies beyond their capabilities. Part#cutoff at 4ohmscutoff at 8ohmswire colorbb-10-300 hz0-150 hzbluebb-20-600 hz0-300 hzgreenbb-30-800 hz0-400 hzyellowbb-40-1. Sold in eaches (one bass blocker, for one speaker). 6 khz0-2. Most applicationsrequire quantity 2 of this product. Speaker size cut-off frequency guideline (speaker size & correspondingrecommended frequency)6. 5″, 5×7″, 6×8″, 150hz5″, 5. 2 khz0-600 khzorangebb-50-2. 25″, 300hz3. Bassblockers remove or “cut out” sounds that are below a certain frequency. If you like to crank up the volume, protect your speakers from low-frequencybass distortion and get cleaner sound with this bass blocker from pac. 8 khzblack. 5″, 4″, 4×6″, 600hz (low power) (800hz for higher power)featureseasily handles power of up to 50 watts rmsleads are color coded to prevent misapplication6″ speaker wire at each end (terminated with a 1/4″ female slide connectoron one end and a male slide connector on the other)simple to use 6 db per octave roll-off  high-pass bass blockerencased in shrink tube with wire leads for easy installationuse them to protect your full-range, mid-bass, and mid-range speakers fromdistortion caused by low frequency outputfitted with easy-to-use quick-slide connectors to make installation a snapno splicing or crimping required, just slide one of the bass blocker’sconnectors onto your speaker harness and the other bass blocker connector ontoyour speaker’s positive terminal. 8 khz0-1.

 

Nippon Bass Blocker Pair Packed Quantity 13 #ad

Nippon Bass Blocker Pair Packed Quantity: 13

Nippon Bass Blocker Pair Packed Quantity: 13 #ad - Non-polar 10% compacitor. Pair packed. 100v 33uf for 1″ tweeters and above. 28khz at 4-ohm.

 

PAC BB-2PR Pair of Bass Blocker Designed for 6 Speakers #ad

PAC BB-2PR Pair of Bass Blocker Designed for 6″ Speakers

PAC BB-2PR Pair of Bass Blocker Designed for 6″ Speakers #ad - Removes selected frequencies from the audio source. Designed for use with 6″ and 6-1/2″ speakers. Pair of bass blockers. Protects the speakers from receiving damaging frequencies. Frequencies blocked 4 ohms 0-600 hz / 8 ohms 0-300 hz.

 

Nippon bb133 Pair Audiopipe Bb133 Bass Blockers 6x9 Speakers #ad

Nippon bb133 Pair Audiopipe Bb133 Bass Blockers 6×9 Speakers

Nippon bb133 Pair Audiopipe Bb133 Bass Blockers 6×9 Speakers #ad - Pair audiopipe bb133 bass blockers 6×9 speakers. New, retail. 1-year warranty. Audiop bb133.

 

BASS BLOCKER PAC SOLD AS PAIR bb3pr #ad

BASS BLOCKER PAC SOLD AS PAIR bb3pr

BASS BLOCKER PAC SOLD AS PAIR bb3pr #ad - Max output level 135v. Bass blocker pac sold as pair bb3pr. 27hz-63hz parametric bass boost. Variable bandwidth adjustment. Led max bass indicators.

 

Audiopipe BB14 Bass Blocker Audiopipe 28khz In Line #ad

Audiopipe BB14 Bass Blocker Audiopipe 2.8khz In Line

Audiopipe BB14 Bass Blocker Audiopipe 2.8khz In Line #ad - Bass blocker audiopipe 28khz in line. Handle up to 50 watts rms. 6 db per octave roll-off.

 

Crutchfield 5000Hz Tweeter Bass Blocker pair #ad

Crutchfield 5000Hz Tweeter Bass Blocker pair

Crutchfield 5000Hz Tweeter Bass Blocker pair #ad - Eliminate bass distortion in your tweeters protect your new tweeters from bass distortion and enjoy cleaner sound with crutchfield’s bass blockers. If you use 2-ohm tweeters, the cut-off point is double the listed frequency. If you use 8-ohm tweeters, the cut-off point is half the listed frequency. The listed cut-off points are at 4 ohms. Each bass blocker handles up to 50 watts rms with a 6 db per octave roll-off.

 

AUDIOPIPE 525 65 133 UF BASS BLOCKERS 300Hz  4 OHM 5-14 6-12 2 PCS #ad

AUDIOPIPE 5.25″ 6.5″ 133 UF BASS BLOCKERS 300Hz @ 4 OHM 5-1/4″ 6-1/2″ 2 PCS

AUDIOPIPE 5.25″ 6.5″ 133 UF BASS BLOCKERS 300Hz @ 4 OHM 5-1/4″ 6-1/2″ 2 PCS #ad - Frequencies blocked at 4 ohms 0, 300 hz, 8 ohms 0, 150 hz. 133 uf 50 volts 300 hz at 4 ohm. Works great for 5″x7″, 6″x8″ and 6″x9″ speakers. Quantity 1 pack (2 pieces). Non-poplar 10 percent cap.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.