21 Top Axle Pullers

 

Specialty Products Company 499-1 Yoke for Flange Axle Puller Part No 499 #ad

Specialty Products Company 499-1 Yoke for Flange Axle Puller (Part No: 499)

Specialty Products Company 499-1 Yoke for Flange Axle Puller (Part No: 499) #ad - The flange axle puller can be used as a regular wheel puller or hub puller, as well as a flange type puller. Specialty products company (spc) 499-1 yoke for flange axle puller (part 499). The bolt circle range is from 4-1/2 inch to 5-1/2 inch, which covers all cars and small trucks with flange type axles. The four slots allow this puller to be used on either 4, 5, or 6 stud designs.

 

TruePower 20-2073 Master Axle Puller Tool Set 18 Piece 1 Pack #ad

TruePower 20-2073 Master Axle Puller Tool Set (18 Piece), 1 Pack

TruePower 20-2073 Master Axle Puller Tool Set (18 Piece), 1 Pack #ad - Internal and external three leg and two leg jaw puller yokes. 55 lb slide hammer, 22-1/2” long shaft. Dent puller screws(large and small), locknut cone. Front hub puller, lip puller, dent puller hook.

 

Westward 2HLA2 Axle Puller Plate Length 7 In #ad

Westward 2HLA2 Axle Puller Plate, Length 7 In

Westward 2HLA2 Axle Puller Plate, Length 7 In #ad - All-in-one t-handle puller threads into axle for easy installation or removal. By allstar performance. Tool includes adapters to fit 3/8″-16 coarse or 3/8″-24 fine thread solid axles, and 3/4″-16 fine thread gun-drilled axles.

 

Otc 7372 Rear Axle Puller Plate #ad

Otc 7372 Rear Axle Puller Plate

Otc 7372 Rear Axle Puller Plate #ad - 7372 � rear axle pulling plate. It works on axles having bolts and studs up to 9/16″ diameter. Rear axle puller this puller will enable you to remove flange-type rear axles from most late model cars and light trucks. No. � Fits 4-, 5-, or 6-bolt patterns and stud circles from 4-1/4″ to 5-9/16″.

 

ATD Tools ATD-3053 Rear Axle Puller Set #ad

ATD Tools ATD-3053 Rear Axle Puller Set

ATD Tools ATD-3053 Rear Axle Puller Set #ad - Bsb manufacturing 9030 axle puller tool all in one. Dimensions in inches (lxwxh) 67 x 67 x 05.

 

OEMTOOLS 27032  Flange-Type Axle Puller #ad

OEMTOOLS 27032 Flange-Type Axle Puller

OEMTOOLS 27032 Flange-Type Axle Puller #ad - Pulls pulleys on gm belt driven vacuum pumps. Slots in the yoke permit use on axles with 4, 5, and 6 studs. Features two screws for use on most ford, chrysler, gm and vw power steering pulleys. Bolt circle range is from 4-1/2 inch to 5-1/2 inch.

 

Specialty Products Company 498-1 Yoke for Front Hub and Axle Puller Part No 498 #ad

Specialty Products Company 498-1 Yoke for Front Hub and Axle Puller (Part No: 498)

Specialty Products Company 498-1 Yoke for Front Hub and Axle Puller (Part No: 498) #ad - The front hub and axle puller removes front hubs on vehicles with independent front suspensions. Specialty products company (spc) 498-1 yoke for front hub and axle puller (part 498). Remove the screw and use it with 499 axle puller to remove axles in compact cars.

 

REAR AXLE PULLER SET ATD-3053 #ad

REAR AXLE PULLER SET (ATD-3053)

REAR AXLE PULLER SET (ATD-3053) #ad - ), 1-piece lock nut 5/8″ (16mm) and 1-piece bearing hook. 78 kgs. 1-piece slide hammer 3-3/4 lbs. Set contains 1-piece slide screw 5/8″-18t x 22-1/2″, (16mm-16t x 57cm), 1-piece axle yoke, 3-piece-bearing adapter. (1. Slide hammer power pulls many flange-type rear axles as well as axle bearings.

 

Specialty Products Company 498-3 Jam Nut for Front Hub and Axle Puller Part No 498 #ad

Specialty Products Company 498-3 Jam Nut for Front Hub and Axle Puller (Part No: 498)

Specialty Products Company 498-3 Jam Nut for Front Hub and Axle Puller (Part No: 498) #ad - Remove the screw and use it with 499 axle puller to remove axles in compact cars. The front hub and axle puller removes front hubs on vehicles with independent front suspensions. Specialty products company (spc) 498-3 jam nut for front hub and axle puller.

 

Bearing Rmvr 1950Rear Axle Puller #ad

Bearing Rmvr (1.950)(Rear Axle Puller)

Bearing Rmvr (1.950)(Rear Axle Puller) #ad - Bearing rmvr (1950)(rear axle puller) by bosch automotive service solutions. 11.

 

HFS R Rear Axle Bearing Puller Set #ad

HFS (R) Rear Axle Bearing Puller Set

HFS (R) Rear Axle Bearing Puller Set #ad - To 2-3/8 in, 1-3/8 in. To 2-7/8 in. To 1-7/8 in, 1-5/16 in. Works on most domestic cars. Includes fittings for main bearing tube id 1 in. This set works with any 5/8-18 unf threaded slide hammers. Rear axle bearing service set these pullers quickly remove semi-floating rear axle bearings.

 

FWD Axle Puller PUAX-001 #ad

FWD Axle Puller, #PUAX-001

FWD Axle Puller, #PUAX-001 #ad - Universal application for pulling front hubs on fwd cars. Fully dropped forged. Applies up 5 tons of force. Works with any 5/8″ unf shaft. Capacity 3-1/8″ to 5″(80 to 127mm) stud circle.

 

Specialty Products Company 499-2 Center Rod Assembly for Flange Axle Puller Part No 499 #ad

Specialty Products Company 499-2 Center Rod Assembly for Flange Axle Puller (Part No: 499)

Specialty Products Company 499-2 Center Rod Assembly for Flange Axle Puller (Part No: 499) #ad - Specialty products company (spc) 499-2 center rod assembly for flange axle puller (part 499). The bolt circle range is from 4-1/2 inch to 5-1/2 inch, which covers all cars and small trucks with flange type axles. The flange axle puller can be used as a regular wheel puller or hub puller, as well as a flange type puller. The four slots allow this puller to be used on either 4, 5, or 6 stud designs.

 

Specialty Products Company 498-1 Yoke for Front Hub and Axle Puller Part No 498 by Specialty Products Company #ad

Specialty Products Company 498-1 Yoke for Front Hub and Axle Puller (Part No: 498) by Specialty Products Company

Specialty Products Company 498-1 Yoke for Front Hub and Axle Puller (Part No: 498) by Specialty Products Company #ad - Bearing rmvr (1950)(rear axle puller) by bosch automotive service solutions. Specialty products company 498-1 yoke for front hub and axle puller (part no 498).

 

Westward 2HLA3 Rear Axle Puller Slide Hammer #ad

Westward 2HLA3 Rear Axle Puller, Slide Hammer

Westward 2HLA3 Rear Axle Puller, Slide Hammer #ad - Rear axle puller, slide hammer, length 23 in, number of pieces 4, rear axle puller fits most late model passenger cars and light trucks for removal of flange type rear axles, fits 4, 5, or 6 bolt stud circle from 4 1/4 to 5 9/16 in, the puller will service axles with bolts and studs up to 9/16 in diameter, material carbon steel, includes rear axle pulling plate with 5 lb slide hammer assembly.

 

16PC Axle Slide Hammer Dent Panel Bearing Puller Set Garage Tool #ad

16PC Axle Slide Hammer Dent Panel Bearing Puller Set Garage Tool

16PC Axle Slide Hammer Dent Panel Bearing Puller Set Garage Tool #ad - 5-lb hammer, shank,t-bar assembly, grip wrench adapter, dent puller, pulling (cone) adapter, seal hook hard plastic blow-molded carrying case. 5-pound steel slide hammer constructed of crv steel for smooth operation, improved durability, corrosion resistance. Includes an external 3-jaw puller, internal 3-jaw puller, external 2-jaw puller, internal 2-jaw puller. Easily remove mechanical, press-fit parts (bearings, gears, bushings, pulleys, etc) from a shaft remove shafts from inside a hole. Full kit, ideal for use on a wide variety of pulling applications, including pulling dents fits many sizes of bearings, shafts and gears.

 

Specialty Products Company 498-2 Center Screw for Front Hub and Axle Puller Part No 498 #ad

Specialty Products Company 498-2 Center Screw for Front Hub and Axle Puller (Part No: 498)

Specialty Products Company 498-2 Center Screw for Front Hub and Axle Puller (Part No: 498) #ad - Remove the screw and use it with 499 axle puller to remove axles in compact cars. The front hub and axle puller removes front hubs on vehicles with independent front suspensions. Specialty products company (spc) 498-2 center screw for front hub and axle puller (part 498) center screw for front hub and axle puller (part 498).

 

ABN Axle and Front Wheel Hub Puller Flange Type 3-34“ Inches to 4-12“ Inches #ad

ABN Axle and Front Wheel Hub Puller, Flange Type, 3-3/4“ Inches to 4-1/2“ Inches

ABN Axle and Front Wheel Hub Puller, Flange Type, 3-3/4“ Inches to 4-1/2“ Inches #ad - Durable heated pressure screw holds up to tough use drive center hole for the wheel studs and are constructed of heat-treated alloy steel that is drop forged for strength and longevity. Practical the abn flange type axle and front wheel hub puller easy makes for easy brake and bearing maintenance. Compatible fits domestic and import vehicles with independent front wheel suspension use on any vehicle with studs that are inside the drum and has a tapered axle and 4-6 lugs. Specifications yoke and bolt are threaded 5/8-inch x 18 inches. Versatile use on 4, 5, or 6 bolt stud design and all non-c lock gm axles.

 

Bsb Manufacturing 9030 Axle Puller Tool All In One #ad

Bsb Manufacturing 9030 Axle Puller Tool All In One

Bsb Manufacturing 9030 Axle Puller Tool All In One #ad - Dimensions in inches (lxwxh) 6. 7 x 0. 7 x 6. Bsb manufacturing 9030 axle puller tool all in one. 5.

 

Alltrade 648611 Kit 41 Master Axle Puller Tool Set #ad

Alltrade 648611 Kit 41 Master Axle Puller Tool Set

Alltrade 648611 Kit 41 Master Axle Puller Tool Set #ad - Kit 41 includes 21-piece for pulling the master axle. Storage case includes usage photos. Also functions as a slide hammer for dent pulling and gear pulling duty. Removes seals from front and rear wheel vehicles. Made to be the most reliable tools in the market today. Tool set for removing front and rear axle bearings. Tool solutions for most all situations. Built to exceed tool standards.

 

Specialty Products Company 498 Front Hub and Axle Puller #ad

Specialty Products Company 498 Front Hub and Axle Puller

Specialty Products Company 498 Front Hub and Axle Puller #ad - Remove the screw and use it with 499 axle puller to remove axles in compact cars. Its applications are compact cars. The set includes 498-1 yoke, 498-2 center screw, 498-3 jam nut. Specialty products company (spc) front hub and axle puller removes front hubs on vehicles with independent front suspensions.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.