23 Top Dynalite Calipers

 

NEW WILWOOD FULL FRONT DISC BRAKE KIT 11 DRILLED ROTORS RED DYNALITE CALIPERS PADS 1982-1992 CHEVY CAMARO PONTIAC FIREBIRD 1982 1983 1984 1985 1986 1987 1988 1989 1990 1991 1992

NEW WILWOOD FULL FRONT DISC BRAKE KIT, 11″ DRILLED ROTORS, RED DYNALITE CALIPERS, PADS, 1982-1992 CHEVY CAMARO, PONTIAC FIREBIRD, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992

NEW WILWOOD FULL FRONT DISC BRAKE KIT, 11″ DRILLED ROTORS, RED DYNALITE CALIPERS, PADS, 1982-1992 CHEVY CAMARO, PONTIAC FIREBIRD, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992 - Fits | chevrolet 1982-1992 camaro | pontiac 1982-1992 firebird. Only one side pictured see the list, the diagram, and brake kit assembly booklet below for a detail of the auto parts included. Brand new wilwood forged dynalite pro series bolt-on front hub & 11″ disc brake kit (part # 140-11012-dr) for both front wheels features drilled and slotted rotors with red calipers. Brake kit includes parts for both front wheels | drilled and slotted,810″ thick x 11″ od rotors forged dynalite calipers, red caliper mounting brackets bp-10 smart compound brake pads hubs bearings seals all hardware necessary to install the complete braking system on both front wheels complete kit weighs approximately 41 lbs you can view and download the complete brake kit assembly instruction booklet for this kit below. Wilwood brake kits consist of specifically engineered & matched groups of components designed to provide superior brake system performance & custom appeal over a wide range of applications fdl pro series front hub kits offer complete disc brake upgrade solutions for traditional non-abs spindle applications on american muscle cars, vintage rods, & heavyweight drag cars based on the venerable forged billet dynalite caliper, these versatile kits are easily optioned to suit the braking requirements & style preferences for a daily driver, serious competition, or the most discriminating show enthusiast most kits require no modificiation for installation these kits can be used with either manual or power boost master cylinders these brake kits require at least 15″ diameter wheels.

 

NEW WILWOOD REAR DISC BRAKE KIT 12 ROTORS PARKING BRAKE ASSEMBLIES RED 4 PISTON DYNALITE CALIPERS PADS FOR REAR ENDS WITH GM 10  12 BOLT AXLE FLANGES 275 OFFSET STAGGERED SHOCKS CHEVY

NEW WILWOOD REAR DISC BRAKE KIT, 12″ ROTORS, PARKING BRAKE ASSEMBLIES, RED 4 PISTON DYNALITE CALIPERS, PADS, FOR REAR ENDS WITH GM 10 / 12 BOLT AXLE FLANGES, 2.75″ OFFSET, & STAGGERED SHOCKS, CHEVY

NEW WILWOOD REAR DISC BRAKE KIT, 12″ ROTORS, PARKING BRAKE ASSEMBLIES, RED 4 PISTON DYNALITE CALIPERS, PADS, FOR REAR ENDS WITH GM 10 / 12 BOLT AXLE FLANGES, 2.75″ OFFSET, & STAGGERED SHOCKS, CHEVY - Brake kit includes parts for both rear wheels | > drilled/slotted, 810″ thick x 1219″ od rotors > forged dynalite 4 piston calipers, red > drum parking brake assemblies with caliper mounting brackets > bp-10 smart compound brake pads > brake hats > all hardware necessary to install the complete braking system on both rear wheels > complete kit weighs approximately 51 lbs. Forged billet dynalite 4-piston calipers, 1219″ od one-piece drum/rotors, and high friction pads provide optimized and balanced braking for all types of custom performance street/strip and show machines | the neatly hidden internal shoe system provides a clean installation with superior static holding power for parking | these big brake kits require at least 16″ diameter wheels . Brand new wilwood staggered shock, rear parking brake, pro series forged dynalite, bolt-on 1219″ disc brake kit (part # 140-9315-dr) for both rear wheels | only one side pictured | see the list, the diagram, and the assembly booklet for a detail of the parts included | features drilled/slotted rotors and red calipers. Fits | gm 10 bolt and 12 bolt rear ends with the “gm / chevy” axle flanges and a 275″ axle flange offset (see diagrams shown in the images), and with staggered shocks | “staggered shock” applications have the left side shock in back of the rear end housing and the right side shock in front | in these applications, it’s necessary to have this modified left side brake kit, which mounts the caliper in front of the housing to avoid any clearance issues with the shock | this was common on many 1967-1969 chevy camaro’s and pontiac firebird’s. Wilwood brake kits consist of specifically engineered and matched groups of components designed to provide superior brake system performance and custom appeal over a wide range of applications | these fdl pro series rear disc kits provide a complete solution for popular muscle car rear axles that require a parking brake.

 

NEW WILWOOD FULL FRONT DISC BRAKE KIT 12 DRILLED ROTORS POLISHED DYNALITE CALIPERS PADS 2001 - 2010 CHRYSLER PT CRUISER 2003 - 2005 DODGE NEON SRT-4 2001 2002 2003 2004 2005 2006 2007

NEW WILWOOD FULL FRONT DISC BRAKE KIT, 12″ DRILLED ROTORS, POLISHED DYNALITE CALIPERS, PADS, 2001 – 2010 CHRYSLER PT CRUISER, 2003 – 2005 DODGE NEON SRT-4, 2001, 2002, 2003, 2004, 2005, 2006, 2007

NEW WILWOOD FULL FRONT DISC BRAKE KIT, 12″ DRILLED ROTORS, POLISHED DYNALITE CALIPERS, PADS, 2001 – 2010 CHRYSLER PT CRUISER, 2003 – 2005 DODGE NEON SRT-4, 2001, 2002, 2003, 2004, 2005, 2006, 2007 - Fits | 2001-2010 chrysler pt cruiser | 2003-2005 dodge neon srt-4. Brake kit includes parts for both front wheels | drilled and slotted,810″ thick x 1219″ od rotors forged dynalite calipers, polished caliper mounting brackets bp-10 smart compound brake pads brake hats all hardware necessary to install the complete braking system on both front wheels complete kit weighs approximately 35 lbs | below you can view and download the complete assembly instruction booklet for this kit here. These big brake kits require at least 16″ diameter wheels. Wilwood brake kits consist of specifically engineered and matched groups of components designed to provide superior brake system performance and custom appeal over a wide range of applications forged billet dynalite calipers, oversized 1219″ od rotors, and high performance wilwood brake pads deliver big brake stopping power with high-tech style for front wheel drive sport compacts these kits are the perfect compliment wheel, tire, and suspension upgrades on all types of vehicles. Brand new wilwood premium big brake forged dynalite bolt-on front hat and 1219″ disc brake kit (part # 140-6376-dp) for both front wheels only one side pictured see the list, the diagram, and the brake kit assembly booklet below for a detail of the auto parts included features drilled and slotted rotors with polished calipers.

 

NEW WILWOOD REAR DISC BRAKE KIT 12 ROTORS POLISHED 4 PISTON DYNALITE CALIPERS FOR REAR ENDS WITH SMALL BEARING FORD AXLE FLANGES 266 OFFSET FORD MUSTANG FAIRLANE FALCON MERCURY COMET COUGAR

NEW WILWOOD REAR DISC BRAKE KIT, 12″ ROTORS, POLISHED 4 PISTON DYNALITE CALIPERS FOR REAR ENDS WITH SMALL BEARING FORD AXLE FLANGES & 2.66″ OFFSET, FORD MUSTANG FAIRLANE FALCON MERCURY COMET COUGAR

NEW WILWOOD REAR DISC BRAKE KIT, 12″ ROTORS, POLISHED 4 PISTON DYNALITE CALIPERS FOR REAR ENDS WITH SMALL BEARING FORD AXLE FLANGES & 2.66″ OFFSET, FORD MUSTANG FAIRLANE FALCON MERCURY COMET COUGAR - Brake kits are designed to fit oe factory spindles > brake kit includes > 81″ thick x 1219″ dia, 8 x 762″ bolt circle, rotors > hat > caliper mounting brackets > forged dynalite calipers, polished > bolts, washers, bolts, shims > bp-10 smart compound brake pads. Fits > rear end small ford, rear kit > axle offset 266 | notes > kit may fit some 15″ wheels > check wheel clearance diagram (shown in the images) before purchase. New wilwood forged dynalite pro series rear disc brake kit, 12″ rotors, 4 piston dynalite calipers for rear ends with small bearing ford axle flanges and 266″ offset, ford mustang fairlane falcon mercury comet cougar etc (part # 140-2113-p) > only one side shown in the images > features plain face rotors and polished calipers. Forged billet dynalite four piston calipers, two-piece hat and rotor assemblies, and high friction pads provide optimized and balanced braking for all types of off-road, competition, and other customized applications > fdl calipers can be optioned with a full range of finishes to reflect personalized style > rotor choices provide options for high-tech show winning style, or heavy weight durability and cooling capacity for high heat competition. Wilwood brake kits consist of specifically engineered and matched groups of components designed to provide superior brake system performance and custom appeal over a wide range of applications > fdl pro-series rear disc brake kits provide a complete solution for popular muscle car rear axles on applications where individual wheel parking brake assemblies are not required.

 

Wilwood 180-0056 18 X 35 Cotter Pin Kit for Dynalite Caliper

Wilwood 180-0056 1/8″ X 3.5″ Cotter Pin Kit for Dynalite Caliper

Wilwood 180-0056 1/8″ X 3.5″ Cotter Pin Kit for Dynalite Caliper - Product dimension (lxwxh) 6x8x25. Wilwood 180-0056 cotter pin kit 1/8 x 35in d/l.

 

NEW WILWOOD FULL FRONT DISC BRAKE KIT 11 DRILLED ROTORS POLISHED DYNALITE CALIPERS PADS 1984-1993 FORD MUSTANG THUNDERBIRD 5 LUG 1984 1985 1986 1987 1988 1989 1990 1991 1992 1993

NEW WILWOOD FULL FRONT DISC BRAKE KIT, 11″ DRILLED ROTORS, POLISHED DYNALITE CALIPERS, PADS, 1984-1993 FORD MUSTANG, THUNDERBIRD, 5 LUG, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993

NEW WILWOOD FULL FRONT DISC BRAKE KIT, 11″ DRILLED ROTORS, POLISHED DYNALITE CALIPERS, PADS, 1984-1993 FORD MUSTANG, THUNDERBIRD, 5 LUG, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993 - Fits | ford | 1984-1986 mustang svo 1987-1993 mustang with v-8 spindles 1987-1988 thunderbird turbo coupe these are for 5 lug applications. Only one side pictured see the list, the diagram, and the brake kit assembly booklet below for a detail of the auto parts included. Brake kit includes parts for both front wheels drilled & slotted, 810″ thick x 11″ od rotors forged dynalite calipers, polished caliper mounting brackets bp-10 smart compound brake pads hubs bearings seals all hardware necessary to install the complete braking system on both front wheels complete brake kit weighs approximately 40 lbs you can view and download the complete assembly instruction booklet for this wilwood brake kit below. Brand new wilwood forged dynalite pro series bolt-on front hub & 11″ disc brake kit (part # 140-11018-dp) for both front wheels features drilled & slotted rotors with polished calipers. Wilwood brake kits consist of specifically engineered & matched groups of components designed to provide superior brake system performance & custom appeal over a wide range of applications fdl pro series front hub kits offer complete disc brake upgrade solutions for traditional non-abs spindle applications on american muscle cars, vintage rods, & heavyweight drag cars based on the venerable forged billet dynalite caliper, these versatile kits are easily optioned to suit the braking requirements & style preferences for a daily driver, serious competition, or the most discriminating show enthusiast most kits require no modification for installation these kits can be used with either manual or power boost master cylinders these brake kits require at least 15″ diameter wheels.

 

NEW WILWOOD FRONT DISC BRAKE KIT 11 ROTORS BLACK DYNALITE CALIPERS PADS FITS 1955 1956 1957 CHEVY WITH HEIDTS 2 DROP SPINDLES TRI-5 150 210 BEL AIR DEL RAY NOMAD SEDAN DELIVERY

NEW WILWOOD FRONT DISC BRAKE KIT, 11″ ROTORS, BLACK DYNALITE CALIPERS, PADS, FITS 1955 1956 1957 CHEVY WITH HEIDTS 2″ DROP SPINDLES, TRI-5 150 210 BEL AIR DEL RAY NOMAD SEDAN DELIVERY

NEW WILWOOD FRONT DISC BRAKE KIT, 11″ ROTORS, BLACK DYNALITE CALIPERS, PADS, FITS 1955 1956 1957 CHEVY WITH HEIDTS 2″ DROP SPINDLES, TRI-5 150 210 BEL AIR DEL RAY NOMAD SEDAN DELIVERY - Based on the venerable forged billet dynalite caliper, these versatile kits are easily optioned to suit the braking requirements and style preferences for a daily driver, serious competition, or the most discriminating show enthusiast | most kits require no modification for installation | these kits can be used with either manual or power boost master cylinders | these big brake kits require at least 15″ diameter wheels . Fits | chevrolet | > 1955-1957 chevy 150 with heidts 2″ drop spindles > 1955-1957 chevy 210 with heidts 2″ drop spindles > 1955-1957 chevy bel air with heidts 2″ drop spindles. Brake kit includes parts for both front wheels | > 810″ thick x 11″ od rotors > forged dynalite 4 piston calipers, black > caliper mounting brackets > bp-10 smart compound brake pads > hubs > bearings > seals > all bolts, washers, and shims necessary to install the complete braking system on both front wheels > complete kit weighs approximately 40 lbs > the complete assembly instruction booklet for this kit will be included. Brand new wilwood pro series forged dynalite bolt-on front hub and 11″ disc brake kit (part # 140-12305-b) for both front wheels | only one side pictured | see the list, the diagram, and the assembly booklet for a detail of the parts included | features black calipers. Wilwood brake kits consist of specifically engineered and matched groups of components designed to provide superior brake system performance and custom appeal over a wide range of applications | fdl pro series front hub kits offer complete disc brake upgrade solutions for traditional non-abs spindle applications on american muscle cars, vintage rods, and heavyweight drag cars.

 

NEW WILWOOD REAR DISC BRAKE KIT 12 ROTORS RED 4 PISTON DYNALITE CALIPERS FOR REAR ENDS WITH BIG BEARING FORD NEW STYLE AXLE FLANGES STAGGERED SHOCKS 250 OFFSET AKA TORINO FLANGES

NEW WILWOOD REAR DISC BRAKE KIT, 12″ ROTORS, RED 4 PISTON DYNALITE CALIPERS FOR REAR ENDS WITH BIG BEARING FORD NEW STYLE AXLE FLANGES, STAGGERED SHOCKS, & 2.50″ OFFSET, AKA TORINO FLANGES

NEW WILWOOD REAR DISC BRAKE KIT, 12″ ROTORS, RED 4 PISTON DYNALITE CALIPERS FOR REAR ENDS WITH BIG BEARING FORD NEW STYLE AXLE FLANGES, STAGGERED SHOCKS, & 2.50″ OFFSET, AKA TORINO FLANGES - Forged billet dynalite 4-piston calipers, 1219″ od one-piece drum/rotors, and high friction pads provide optimized and balanced braking for all types of custom performance street/strip and show machines > the neatly hidden internal shoe system provides a clean installation with superior static holding power for parking. Fits > rear ends with big ford new style axle flanges (shown in the images) and a 250″ axle flange offset, and with staggered shocks > “staggered shock” applications have the left side shock in back of the rear end housing and the right side shock in front > in these applications, it’s necessary to have this modified left side brake kit, which mounts the caliper in front of the housing to avoid any clearance issues with the shock . Brake kit includes parts for both rear wheels > 810″ thick x 1219″ od rotors > forged dynalite 4 piston calipers, red > drum parking brake assemblies with caliper mounting brackets > bp-10 smart compound brake pads > brake hats > all bolts, washers, and shims necessary to install the complete braking system on both rear wheels > complete kit weighs approximately 50 lbs. Wilwood brake kits consist of specifically engineered and matched groups of components designed to provide superior brake system performance and custom appeal over a wide range of applications > these fdl pro series rear disc kits provide a complete solution for popular muscle car rear axles that require a parking brake. Brand new wilwood pro series bolt-on 1219″ rear kit with parking brake kit for rear ends with big ford new style axle flanges and staggered shocks (part # 140-9560-r) for both rear wheels > only one side pictured > see the list, the diagram, and the assembly booklet for a detail of the parts included > features standard rotors and red calipers.

 

WILWOOD FRONT DISC BRAKE 2 DROP SPINDLE KIT 12 ROTORS POLISHED DYNALITE CALIPERS PADS SPINDLES 1955 1956 1957 CHEVYS TRI-5 CHEVY 150 210 BEL AIR DEL RAY NOMAD SEDAN DELIVERY HEIDTS

WILWOOD FRONT DISC BRAKE & 2″ DROP SPINDLE KIT, 12″ ROTORS, POLISHED DYNALITE CALIPERS, PADS, SPINDLES, 1955 1956 1957 CHEVY’S, TRI-5, CHEVY 150, 210, BEL AIR, DEL RAY, NOMAD, SEDAN DELIVERY, HEIDT’S

WILWOOD FRONT DISC BRAKE & 2″ DROP SPINDLE KIT, 12″ ROTORS, POLISHED DYNALITE CALIPERS, PADS, SPINDLES, 1955 1956 1957 CHEVY’S, TRI-5, CHEVY 150, 210, BEL AIR, DEL RAY, NOMAD, SEDAN DELIVERY, HEIDT’S - Forged billet dynalite calipers, 1219″ diameter rotors, and high performance wilwood brake pads generate big brake stopping power to compliment wheel, tire, and suspension upgrades on all types of custom show and performance street/strip machines | these kits can be used with either manual or power boost master cylinders | make sure to check the assembly instruction booklet to see any modifications that might be necessary for your application | drop spindles provide a full 2″ drop, while not changing the vehicle’s steering geometry | they will accept the stock ball joints and steering arms these big brake kits require at least 16″ diameter wheels. Fits | chevrolet | 1955-1957 chevy 150 | 1955-1957 chevy 210 | 1955-1957 chevy bel air. Kit includes parts for both front wheels | 2″ drop spindles | 810″ thick x 1219″ od rotors | forged dynalite calipers, polished | caliper mounting brackets | bp-10 smart compound brake pads | hubs | bearings | seals | all bolts, washers, shims, and nuts necessary to install the complete braking system on both front wheels | complete kit weighs approximately 60 lbs. Wilwood brake kits consist of specifically engineered and matched groups of components designed to provide superior brake system performance and custom appeal over a wide range of applications | fdl big brake front hub kits provide the added advantage of larger diameter brake rotors for traditional non-abs spindles on american muscle cars and vintage rods. Brand new wilwood premium big brake forged dynalite bolt-on front hub and 1219″ disc brake kit with 2″ drop spindles (part # 140-12306-p and # 103-9760) for both front wheels only one side pictured | see the list, the diagram, and the assembly booklet for a detail of the parts included | features 2″ drop spindles and polished calipers.

 

Wilwood 150-8850K BP-10 Dynalite Caliper Brake Pad Set - 4 Piece

Wilwood 150-8850K BP-10 Dynalite Caliper Brake Pad Set – 4 Piece

Wilwood 150-8850K BP-10 Dynalite Caliper Brake Pad Set – 4 Piece - Wilwood 150-8850k bp-10 dynalite caliper brake pad set, 4 piece.

 

NEW WILWOOD DRAG RACING FRONT DISC BRAKE KIT 1075 DRILLED ROTORS BLACK 4 PISTON DYNALITE CALIPERS FOR 70-78 CAMARO FIREBIRD 73-77 GM A-BODY CHEVELLE EL CAMINO MONTE CARLO REGAL CUTLASS GTO

NEW WILWOOD DRAG RACING FRONT DISC BRAKE KIT, 10.75″ DRILLED ROTORS, BLACK 4 PISTON DYNALITE CALIPERS FOR 70-78 CAMARO FIREBIRD, 73-77 GM A-BODY, CHEVELLE, EL CAMINO, MONTE CARLO, REGAL, CUTLASS, GTO

NEW WILWOOD DRAG RACING FRONT DISC BRAKE KIT, 10.75″ DRILLED ROTORS, BLACK 4 PISTON DYNALITE CALIPERS FOR 70-78 CAMARO FIREBIRD, 73-77 GM A-BODY, CHEVELLE, EL CAMINO, MONTE CARLO, REGAL, CUTLASS, GTO - 1977-1978 custom cruiser with oe spindles that were used with 11″ stock rotors > 1973-1977 cutlass with disc brake spindles > 1977-1978 delta 88 with oe spindles that were used with 11″ stock rotors > 1975-1978 omega with disc brake spindles > 1973-1976 vista cruiser with disc brake spindles | pontiac > 1970-1978 firebird with disc brake spindles > 1977-1978 bonneville with oe spindles that were used with 11″ stock rotors. Buick > 1975 apollo with disc brake spindles > 1973-1977 century with disc brake spindles > 1977-1978 estate wagon with oe spindles that were used with 11″ stock rotors > 1977-1978 lesabre with oe spindles that were used with 11″ stock rotors > 1973-1977 regal with disc brake spindles > 1975-1978 skylark with disc brake spindles | cadillac > 1976 seville with disc brake spindles | oldsmobile > 1973 4-4-2 with disc brake spindles. Fits | chevrolet > 1970-1978 camaro with disc brake spindles > 1973-1977 chevelle with disc brake spindles > 1977-1978 concours, all > 1973-1977 el camino, all > 1977-1978 impala with oe spindles that were used with 11″ stock rotors > 1973-1977 malibu with disc brake spindles > 1973-1977 monte carlo with disc brake spindles > 1975-1978 nova with disc brake spindles | gmc > 1973-1977 sprint, all. New wilwood forged dynalite bolt-on front hub and 1075″ drag disc brake kit (part # 140-1019-d) for both front wheels > only one side shown in the images > features drilled rotors and black calipers. Brake kit includes parts for both front wheels > drilled, 350″ thick x 1075″ od rotors > forged dynalite calipers, black > caliper mounting brackets > bp-10 smart compound brake pads > hubs > bearings > seals > all hardware necessary to install the complete braking system on both front wheels > complete brake kit weighs approximately 34 lbs.

 

Wilwood 15B-7264K Billet Narrow Dynalite Caliper B Type Brake Pad Set - 4 Piece

Wilwood 15B-7264K Billet Narrow Dynalite Caliper B Type Brake Pad Set – 4 Piece

Wilwood 15B-7264K Billet Narrow Dynalite Caliper B Type Brake Pad Set – 4 Piece - For most asphalt and road race applications compounds in the high temperature ranges over 1000éf range are usually necessary. Many factors and unforeseen influences can affect brake temperatures. The best indicator for pad selection will always be on track performance. Keep in mind that these are general ranges and not absolute values. ááááMedium-high friction compound with good cold response and a gently rising friction curve as temperature increases. ááááSmooth predictable engagement with excellent control over a wide range of applications. ááááLong wearing pad in the middle temperature ranges with moderate wear in sustained high heat conditions. The pads must be capable of maintaining the proper amount of friction for stopping power within the temperatures that will be realized on the track during the event. If pad fade (friction loss) due to overheating occurs then improved cooling a heavier rotor or a higher temperature range pad may all become necessary. Medium-high friction good cold responsegently rising torque curve predictable engagemnetlow wear rate at medium temperatures increasing to moderate at high temperature. Dirt track drag race and street performance applications usually operate at temperatures between 500é and 1000éf. Then overall wear rate must be considered. Compound temperature range & torque valuestemperature range and overall friction value are the primary considerations for pad selection. ááááEasily bedded without abrasion on new iron or steel rotors.

 

NEW WILWOOD FRONT DRAG RACING DISC BRAKE KIT 1075 ROTORS BLACK DYNALITE CALIPERS 1982-1992 GM F-BODY CHEVY CAMARO PONTIAC FIREBIRD TRANS AM 1982 1983 1984 1985 1986 1987 1988 1989 1990 1991 1992

NEW WILWOOD FRONT DRAG RACING DISC BRAKE KIT, 10.75″ ROTORS, BLACK DYNALITE CALIPERS, 1982-1992 GM F-BODY CHEVY CAMARO PONTIAC FIREBIRD TRANS AM 1982 1983 1984 1985 1986 1987 1988 1989 1990 1991 1992

NEW WILWOOD FRONT DRAG RACING DISC BRAKE KIT, 10.75″ ROTORS, BLACK DYNALITE CALIPERS, 1982-1992 GM F-BODY CHEVY CAMARO PONTIAC FIREBIRD TRANS AM 1982 1983 1984 1985 1986 1987 1988 1989 1990 1991 1992 - Wilwood brake kits consist of specifically engineered and matched groups of components designed to provide superior brake system performance and custom appeal over a wide range of applications. Fits | chevrolet > 1982-1992 camaro | pontiac > 1982-1992 firebird | these brake kits require at least 15″ diameter wheels . Brake kit includes parts for both front wheels > 350″ thick x 1075″ od rotors > forged dynalite calipers, red > caliper mounting brackets > bp-10 smart compound brake pads > hubs > bearings > seals > all hardware necessary to install the complete braking system on both front wheels > complete brake kit weighs approximately 34 lbs. Wilwood’s fdl front drag kits are drag racing’s most popular front brake kits > forged billet fdl four piston calipers mount directly to the spindle with a bolt-on bracket > forged billet, five lug hubs with direct mount steel rotors combine to provide an average weight savings of over 30 lbs compared to stock drum or disc brakes. Brand new wilwood forged dynalite bolt-on front hub and 1075″ drag disc brake kit (part # 140-1035-r) for both front wheels > features red calipers.

 

Wilwood 120-6814 Dynalite II 175 Piston125 Rotor Brake Caliper

Wilwood 120-6814 Dynalite II 1.75″ Piston/1.25″ Rotor Brake Caliper

Wilwood 120-6814 Dynalite II 1.75″ Piston/1.25″ Rotor Brake Caliper - Forged dynalite calipers are a direct replacement for all wilwood dynalite and similar competitive brand calipers with 525″ centered mounting lugs | the forged dynalite uses the same 7112 type brake pad used in all earlier versions of this caliper | the full range of polymatrix pad compounds is available to match brake response and heat range to any application. The superior strength of this innovative design is combined with proven performance features from wilwood’s earlier designs | each caliper is equipped with wilwood’s srs stainless steel bridge plates | the srs plates eliminate the bridge wear caused by pad gouging and extend the service life of the caliper body | the spring-loading action of the srs plates also eliminates pad rattle and dampens the vibration harmonics that contribute to squeal under braking. Other standard wilwood features include high temperature seals and stainless steel pistons to eliminate corrosion and retard heat transfer from the pads | internal fluid passages eliminate the need for external tubes | four corner bleed screws assure simple and effective air evacuation from the system and allow one caliper to be mounted in any front, rear, right, or left position. Wilwood forged dynalite racing brake caliper (wilwood part # 120-6814) | fits 1250″ thick rotors | features four 1750″ pistons. The dynalite caliper series has widespread application over many forms of motorsports | it serves as the base model in the majority of wilwood’s bolt-on disc brake kits | the latest applied developments and innovations in caliper design and manufacturing processes have resulted in substantial improvements in strength and performance over all comparable caliper models | forged dynalites are the strongest calipers in the class | the process of stress-flow forging re-aligns the metal’s grain structure within the contour of the caliper body | this process eliminates the breaks and interruptions to the internal grain structure that occur when machining a straight block billet | the fea generated radial transition design eliminates steps and shoulders in the area between the piston housing body and the caliper bridges | incorporating a radius in this transition area substantially increases resistance to deflection and separation under load | structural deflection and volume displacement tests have proven the forged dynalite to outperform all existing styles of this popular caliper size | without even considering the overall greater strength and reliability of the forging, the reduced deflection tendencies and the resulting decrease in fluid volume displacement translate to increased clamping efficiency with less pedal travel | the bottom line is a taller pedal and better stopping power.

 

Wilwood 15E-9820K Dynalite Caliper E Type Brake Pad Set - 4 Piece

Wilwood 15E-9820K Dynalite Caliper E Type Brake Pad Set – 4 Piece

Wilwood 15E-9820K Dynalite Caliper E Type Brake Pad Set – 4 Piece - Wilwood 15e-9820k dynalite caliper e type brake pad set, 4 piece.

 

NEW WILWOOD REAR DISC BRAKE KIT 12 ROTORS RED 4 PISTON DYNALITE CALIPERS FOR REAR ENDS WITH GM 10  12 BOLT AXLE FLANGES C-CLIP ELIMINATORS 291 OFFSET CHEVY

NEW WILWOOD REAR DISC BRAKE KIT, 12″ ROTORS, RED 4 PISTON DYNALITE CALIPERS, FOR REAR ENDS WITH GM 10 / 12 BOLT AXLE FLANGES, C-CLIP ELIMINATORS, & 2.91″ OFFSET, CHEVY

NEW WILWOOD REAR DISC BRAKE KIT, 12″ ROTORS, RED 4 PISTON DYNALITE CALIPERS, FOR REAR ENDS WITH GM 10 / 12 BOLT AXLE FLANGES, C-CLIP ELIMINATORS, & 2.91″ OFFSET, CHEVY - Kit type 1 > brake kit forged dynalite pro series rear brake kit > rear end 12 bolt c-clip eliminator, rear kit > axle offset 291 | notes brake kits are designed to fit oe factory spindles. Forged billet dynalite four piston calipers, two-piece hat and rotor assemblies, and high friction pads provide optimized and balanced braking for all types of off-road, competition, and other customized applications > fdl calipers can be optioned with a full range of finishes to reflect personalized style > rotor choices provide options for high-tech show winning style, or heavy weight durability and cooling capacity for high heat competition. New wilwood rear disc brake kit, 12″ rotors, 4 piston dynalite calipers, for rear ends with gm 10 / 12 bolt axle flanges, c-clip eliminators, and 291″ offset, chevy (part # 140-5236-r) > only one side shown in the images > features plain face rotors and red calipers. Wilwood brake kits consist of specifically engineered and matched groups of components designed to provide superior brake system performance and custom appeal over a wide range of applications > fdl pro-series rear disc brake kits provide a complete solution for popular muscle car rear axles on applications where individual wheel parking brake assemblies are not required. Brake kit includes > 81″ thick x 1219″ dia, 8 x 762″ bolt circle, rotors > caliper mounting brackets > hat > washer, 328 id x 562 od x 063 thick > bolt, 5/16-24 x 075 long, shcs > forged dynalite calipers, red > washer, 391 id x 625 od x 063 thick > bolt, 3/8-24 x 125 long, hex head > shim, 032 thick > bp-10 smart compound brake pads > cotter pin.

 

Wilwood 15E-7266K Billet Narrow Dynalite Caliper E Type Brake Pad Set - 4 Piece

Wilwood 15E-7266K Billet Narrow Dynalite Caliper E Type Brake Pad Set – 4 Piece

Wilwood 15E-7266K Billet Narrow Dynalite Caliper E Type Brake Pad Set – 4 Piece - Then overall wear rate must be considered. Keep in mind that these are general ranges and not absolute values. ááááSmooth engagement with consistent response from a flat torque curve throughout its entire effective temperature range. The best indicator for pad selection will always be on track performance. Many factors and unforeseen influences can affect brake temperatures. The pads must be capable of maintaining the proper amount of friction for stopping power within the temperatures that will be realized on the track during the event. For most asphalt and road race applications compounds in the high temperature ranges over 1000éf range are usually necessary. Compound temperature range & torque valuestemperature range and overall friction value are the primary considerations for pad selection. Medium friction high effective temperarture range in medium temperature pad group. ááááBeds quickly and provides fast response without excessive abrasion on iron or steel rotors. ááááBest overall wear properties in the medium temperature pad group. If pad fade (friction loss) due to overheating occurs then improved cooling a heavier rotor or a higher temperature range pad may all become necessary. Smooth engagement flat torque curvelow wear rateáááámedium friction compound with the highest effective range in the medium temperature pad group. Dirt track drag race and street performance applications usually operate at temperatures between 500é and 1000éf.

 

NEW WILWOOD REAR DISC BRAKE KIT 12 ROTORS POLISHED 4 PISTON DYNALITE CALIPERS FOR REAR ENDS WITH BIG BEARING FORD NEW STYLE AXLE FLANGES 250 OFFSET AKA TORINO FLANGES

NEW WILWOOD REAR DISC BRAKE KIT, 12″ ROTORS, POLISHED 4 PISTON DYNALITE CALIPERS FOR REAR ENDS WITH BIG BEARING FORD NEW STYLE AXLE FLANGES & 2.50″ OFFSET, AKA TORINO FLANGES

NEW WILWOOD REAR DISC BRAKE KIT, 12″ ROTORS, POLISHED 4 PISTON DYNALITE CALIPERS FOR REAR ENDS WITH BIG BEARING FORD NEW STYLE AXLE FLANGES & 2.50″ OFFSET, AKA TORINO FLANGES - New wilwood rear disc brake kit, 12″ rotors, 4 piston dynalite calipers for rear ends with big bearing ford new style axle flanges and 250″ offset, aka torino flanges (part # 140-2118-p) > only one side shown in the images > features plain face rotors and polished calipers. Forged billet dynalite four piston calipers, two-piece hat and rotor assemblies, and high friction pads provide optimized and balanced braking for all types of off-road, competition, and other customized applications > fdl calipers can be optioned with a full range of finishes to reflect personalized style > rotor choices provide options for high-tech show winning style, or heavy weight durability and cooling capacity for high heat competition. Forged dynalite pro series rear brake kit > fdl pro-series rear disc brake kits provide a complete solution for popular muscle car rear axles on applications where individual wheel parking brake assemblies are not required. Wilwood brake kits consist of specifically engineered and matched groups of components designed to provide superior brake system performance and custom appeal over a wide range of applications. Brake kit includes > 81″ thick x 1219″ dia, 8 x 762″ bolt circle, rotors > hat > caliper mounting brackets > washer, 328 id x 562 od x 063 thick > bolt, 5/16-24 x 075 long, shcs > forged dynalite calipers, polished > washer, 391 id x 625 od x 063 thick > bolt, 3/8-24 x 125 long, hex head > shim, 032 thick > bp-10 smart compound brake pads > cotter pin.

 

NEW WILWOOD FULL FRONT DISC BRAKE KIT 11 ROTORS RED DYNALITE CALIPERS PADS 1979-1986 CHEVY CAMARO IMPALA PONTIAC FIREBIRD BONNEVILLE OLDSMOBILE 88 CUSTOM CRUISER BUICK LESABRE

NEW WILWOOD FULL FRONT DISC BRAKE KIT, 11″ ROTORS, RED DYNALITE CALIPERS, PADS, 1979-1986 CHEVY CAMARO, IMPALA, PONTIAC FIREBIRD, BONNEVILLE, OLDSMOBILE 88, CUSTOM CRUISER, BUICK LESABRE

NEW WILWOOD FULL FRONT DISC BRAKE KIT, 11″ ROTORS, RED DYNALITE CALIPERS, PADS, 1979-1986 CHEVY CAMARO, IMPALA, PONTIAC FIREBIRD, BONNEVILLE, OLDSMOBILE 88, CUSTOM CRUISER, BUICK LESABRE - Brake kit includes parts for both front wheels > 810″ thick x 11″ od rotors > forged dynalite calipers, red > caliper mounting brackets > bp-10 smart compound brake pads > hubs > bearings > seals > all hardware necessary to install the complete braking system on both front wheels > complete brake kit weighs approximately 40 lbs. Wilwood brake kits consist of specifically engineered and matched groups of components designed to provide superior brake system performance and custom appeal over a wide range of applications > fdl pro series front hub kits offer complete disc brake upgrade solutions for traditional non-abs spindle applications on american muscle cars, vintage rods, and heavyweight drag cars. Fits | buick > 1979-1985 estate wagon with oe spindles that were used with 11″ diameter rotors > 1979-1985 lesabre with oe spindles that were used with 11″ diameter rotors > 1979 skylark with oe disc brake spindles | chevrolet > 1979-1981 camaro with oe disc brake spindles > 1979-1990 caprice with oe spindles that were used with 11″ diameter rotors > 1979-1985 impala with oe spindles that were used with 11″ diameter rotors > 1979 nova with oe disc brake spindles. New wilwood forged dynalite pro series bolt-on front hub and 11″ disc brake kit (part # 140-11008-r) for both front wheels. Oldsmobile > 1979-1985 olds 88 with oe spindles that were used with 11″ diameter rotors > 1979-1985 custom cruiser with oe spindles that were used with 11″ diameter rotors > 1979 omega with oe disc brake spindles | pontiac > 1979-1981 bonneville with oe spindles that were used with 11″ diameter rotors > 1979-1981 catalina with oe spindles that were used with 11″ diameter rotors > 1979-1981 firebird with oe disc brake spindles.

 

NEW WILWOOD DRAG RACING REAR DISC BRAKE KIT 1144 DRILLED ROTORS POLISHED 4 PISTON DYNALITE CALIPERS FOR REAR ENDS W BIG BEARING FORD NEW STYLE TORINO AXLE FLANGES AND 250 OFFSET FORD LINCOLN

NEW WILWOOD DRAG RACING REAR DISC BRAKE KIT, 11.44″ DRILLED ROTORS, POLISHED 4 PISTON DYNALITE CALIPERS FOR REAR ENDS W/ BIG BEARING FORD NEW STYLE (TORINO) AXLE FLANGES AND 2.50″ OFFSET, FORD LINCOLN

NEW WILWOOD DRAG RACING REAR DISC BRAKE KIT, 11.44″ DRILLED ROTORS, POLISHED 4 PISTON DYNALITE CALIPERS FOR REAR ENDS W/ BIG BEARING FORD NEW STYLE (TORINO) AXLE FLANGES AND 2.50″ OFFSET, FORD LINCOLN - Wilwood brake kits consist of specifically engineered and matched groups of components designed to provide superior brake system performance and custom appeal over a wide range of applications > fdl rear drag kits are true bolt-on kits for popular muscle car rear axles and aftermarket rears built with custom axle ends. Drag kits are purpose built for sportsman category door cars and others with full functional four-wheel disc brakes > based on the specific style of housing end and axle offset, mounting kits securely install the 4-piston forged dynalite caliper over 3/8″ plate steel rotors that are mounted to the axle with an aluminum hat > these wilwood kits require at least 15″ diameter wheels . Brake kit includes parts for both rear wheels > drilled, 350″ thick x 1144″ od rotors > forged dynalite calipers, polished > caliper mounting brackets > bp-10 smart compound brake pads > brake hats > all hardware necessary to install the complete braking system on both rear wheels > complete kit weighs approximately 27 lb. Brand new wilwood drag racing rear forged dynalite, bolt-on 1144″ disc brake kit (part # 140-2119-dp) for both rear wheels > only one side pictured > see the list, the diagram, and the assembly booklet for a detail of the parts included > features drilled rotors and polished dynalite calipers. Fits > big bearing ford (new style) rear ends with a 3562″ x 2000″ mounting pattern on the axle flange and with a 250″ flange offset (see diagrams shown in the images).

 

NEW WILWOOD FULL FRONT DISC BRAKE KIT 12 DRILLED ROTORS BLACK DYNALITE CALIPERS PADS 2002 - 2006 ACURA RSX 2004-2005 HONDA CIVIC HATCHBACK SI 5 LUG 2002 2003 2004 2005 2006

NEW WILWOOD FULL FRONT DISC BRAKE KIT, 12″ DRILLED ROTORS, BLACK DYNALITE CALIPERS, PADS, 2002 – 2006 ACURA RSX, 2004-2005 HONDA CIVIC HATCHBACK SI 5 LUG, 2002, 2003, 2004, 2005, 2006

NEW WILWOOD FULL FRONT DISC BRAKE KIT, 12″ DRILLED ROTORS, BLACK DYNALITE CALIPERS, PADS, 2002 – 2006 ACURA RSX, 2004-2005 HONDA CIVIC HATCHBACK SI 5 LUG, 2002, 2003, 2004, 2005, 2006 - Fits | 2002, 2006 acura rsx all including type s | 2004, 2005 honda civic hatchback si (5 lug). Brake kit includes parts for both front wheels | drilled and slotted,810″ thick x 1219″ od rotors | forged dynalite calipers, black | caliper mounting brackets | bp-10 smart compound brake pads | brake hats | all hardware necessary to install the complete braking system on both front wheels | complete brake kit weighs approximately 36 lbs | below you can view and download the complete assembly instruction booklet for this wilwood kit. Wilwood brake kits consist of specifically engineered & matched groups of components designed to provide superior brake system performance & custom appeal over a wide range of applications forged billet dynalite calipers, oversized 1219″ od rotors, and high performance wilwood brake pads deliver big brake stopping power with high-tech style for front wheel drive sport compacts these kits are the perfect compliment wheel, tire, and suspension upgrades on all types of vehicles. Brand new wilwood premium big brake forged dynalite bolt-on front hat and 1219″ disc brake kit (part # 140-7014-d) for both front wheels only one side pictured see the list, the diagram, and the brake kit assembly booklet below for a detail of the auto parts included features drilled and slotted rotors with powder coated black calipers. These big brake kits require at least 16″ diameter wheels.

 

NEW WILWOOD DRAG RACING REAR DISC BRAKE KIT 1144 ROTORS POLISHED 4 PISTON DYNALITE CALIPERS FOR REAR ENDS WITH MOPAR 8 34  DANA 60 AXLE FLANGES 236 OFFSET RP400 PERFORMANCE GREEN BEARING

NEW WILWOOD DRAG RACING REAR DISC BRAKE KIT, 11.44″ ROTORS, POLISHED 4 PISTON DYNALITE CALIPERS FOR REAR ENDS WITH MOPAR 8 3/4″ / DANA 60 AXLE FLANGES, 2.36″ OFFSET, & RP400 PERFORMANCE GREEN BEARING

NEW WILWOOD DRAG RACING REAR DISC BRAKE KIT, 11.44″ ROTORS, POLISHED 4 PISTON DYNALITE CALIPERS FOR REAR ENDS WITH MOPAR 8 3/4″ / DANA 60 AXLE FLANGES, 2.36″ OFFSET, & RP400 PERFORMANCE GREEN BEARING - Fits > mopar 8 3/4″ and dana 60 rear ends with a 5 bolt mounting pattern on the axle flange and with a 236″ flange offset (see diagrams shown) > this kit requires the use of mopar performance green bearings (rp-400). Brake kit includes parts for both rear wheels > 350″ thick x 1144″ od rotors > forged dynalite calipers, polished > caliper mounting brackets > bp-10 smart compound brake pads > brake hats > all hardware necessary to install the complete braking system on both rear wheels > complete kit weighs approximately 27 lbs. Wilwood brake kits consist of specifically engineered and matched groups of components designed to provide superior brake system performance and custom appeal over a wide range of applications > fdl rear drag kits are true bolt-on kits for popular muscle car rear axles and aftermarket rears built with custom axle ends. Drag kits are purpose built for sportsman category door cars and others with full functional four-wheel disc brakes > based on the specific style of housing end and axle offset, mounting kits securely install the 4-piston forged dynalite caliper over 3/8″ plate steel rotors that are mounted to the axle with an aluminum hat > these kits require at least 15″ diameter wheels . Brand new wilwood drag racing rear forged dynalite, bolt-on 1144″ disc brake kit (part # 140-0260-p) for both rear wheels only one side pictured > see the list, the diagram, and the assembly booklet for a detail of the parts included > features polished calipers.

 

NEW WILWOOD FRONT REAR DISC BRAKE KIT WITH BRAKE LINES 1219 DRILLED ROTORS RED DYNAPRO DYNALITE CALIPERS 1955 1956 1957 CHEVY 150 210 BEL AIR DEL RAY NOMAD SEDAN DELIVERY TRI-FIVE CHEVROLET

NEW WILWOOD FRONT & REAR DISC BRAKE KIT WITH BRAKE LINES, 12.19″ DRILLED ROTORS, RED DYNAPRO & DYNALITE CALIPERS, 1955 1956 1957 CHEVY 150 210 BEL AIR DEL RAY NOMAD SEDAN DELIVERY TRI-FIVE CHEVROLET

NEW WILWOOD FRONT & REAR DISC BRAKE KIT WITH BRAKE LINES, 12.19″ DRILLED ROTORS, RED DYNAPRO & DYNALITE CALIPERS, 1955 1956 1957 CHEVY 150 210 BEL AIR DEL RAY NOMAD SEDAN DELIVERY TRI-FIVE CHEVROLET - Brand new wilwood complete premium big brake front and rear 1219″ disc brake kit > features drilled/slotted rotors and red calipers. Fits > 1955-1957 chevy 150 with oe drum brake spindles > 1955-1957 chevy 210 with oe drum brake spindles > 1955-1957 chevy bel air with oe drum brake spindles. Rear brake kit includes parts for both rear wheels > drilled/slotted, 810″ thick x 1219″ od rotors > dynalite 4 piston calipers, red > parking brake assemblies with caliper mounting brackets > bp-10 smart compound brake pads > all hardware necessary to install the complete braking system on both rear wheels. Complete brake kit includes > dynapro 6 piston bolt-on front hat, hubs, and 1219″ disc brake kit (part # 140-10737-dr) for both front wheels > dynalite 4 piston bolt-on rear hat and 1219″ disc brake kit (part # 140-11348-dr) for both rear wheels > full line kit for the front with 18″ steel braided lines, caliper fittings, and brake line fittings > full line kit for the rear with 18″ steel braided lines, caliper fittings, and brake line fittings. Front brake kit includes parts for both front wheels > drilled/slotted, 810″ thick x 1219″ od rotors > dynapro 6 piston calipers, red > caliper mounting brackets > bp-10 smart compound brake pads > hubs > hats > bearings > seals > all hardware necessary to install the complete braking system on both front wheels.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.