Best Adjustable Link out of top 15

 

Pro-Tek LL-235S Adjustable Lowering Links 2008-2018 Honda CBR 1000RR CBR-1000RR CBR1000RR

Pro-Tek LL-235S Adjustable Lowering Links 2008-2018 Honda CBR 1000RR CBR-1000RR CBR1000RR

Pro-Tek LL-235S Adjustable Lowering Links 2008-2018 Honda CBR 1000RR CBR-1000RR CBR1000RR - Note not for use with strut, air ride or swingarms longer than 8″ over stock length note for fully adjustable lowering links, you may have to loosen the top and/or bottom shock bolts (without removing) to realign with link during link installation. You are looking at one pro-tek cnc fully adjustable lowering link that replaces the single stock link on a 2008-2018 honda cbr-1000rr (pro-tek part no. It also comes with four aluminum bushings for easy fitment. You simply turn the center piece to find desired ride height and tighten down the adjusting nuts to secure in place. This link is made up of a billet carbon steel center and two stainless steel rod ends with adjusting nuts to tighten down when the desired ride height is reached. Ll-235s). Fully adjustable links allow you to make adjustments on the fly without having to unbolt the lowering link. The cnc made center piece is gold zinc plated to protect against oxidation and corrosion. Its that easy. This kit is brand new in original packaging, manufactured in the usa, and comes complete with manufacturer warranty. There is wiggle room in shock bolts if shock is touching the link upon initial installation. These links come with infinite settings that lower the bike from stock to 4″. Stainless steel rod ends are used with a carbon steel center piece to protect against binding and seizing from metal on metal corrosion when threading.

 

Ingalls Engineering 38970 SmartArm Adjustable Suspension Link

Ingalls Engineering 38970 SmartArm Adjustable Suspension Link

Ingalls Engineering 38970 SmartArm Adjustable Suspension Link - Genuine ingalls engineering product. Rod guide, eliminates side pull on rod, reduces wear on packing, packing nut & stem. Save $10 on our lowering links and kickstands when you purchase our concours 1400 kickstand side & lowering links combo kit. Maximum working pressure 125 psi, maximum temperature 120° f. Long life packing, graphite packing for lubricity and long life.

 

Pro-Tek LL-285S Adjustable Lowering Links 2000-2001 Honda CBR-929RR CBR929RR and 2002-2003 Honda CBR-954RR CBR954RR

Pro-Tek LL-285S Adjustable Lowering Links 2000-2001 Honda CBR-929RR CBR929RR and 2002-2003 Honda CBR-954RR CBR954RR

Pro-Tek LL-285S Adjustable Lowering Links 2000-2001 Honda CBR-929RR CBR929RR and 2002-2003 Honda CBR-954RR CBR954RR - This link is made up of a billet carbon steel center and two stainless steel rod ends with adjusting nuts to tighten down when the desired ride height is reached. Its that easy. The cnc made center piece is gold zinc plated to protect against oxidation and corrosion. You simply turn the center piece to find desired ride height and tighten down the adjusting nuts to secure in place. Ll-285s). The retail price for this kit is $119. This kit is brand new in original packaging, manufactured in the usa, and comes complete with manufacturer warranty. Fully adjustable links allow you to make adjustments on the fly without having to unbolt the lowering link. However, when adjusting the bike extremely low, some bikes may need a slight amount of material removed from the bottom of the shock mount for clearance. It also comes with four aluminum bushings for easy fitment. You are looking at one pro-tek cnc fully adjustable lowering link that replaces the single stock link on a 2000-2001 honda cbr-929rr/re and a 2002-2003 honda cbr-954rr(pro-tek part no. Stainless steel rod ends are used with a carbon steel center piece to protect against binding and seizing from metal on metal corrosion when threading. 95. These links come with infinite settings that lower the bike from stock to 4″. There is wiggle room in shock bolts if shock is touching the link. Note not for use with strut, air ride or swingarms longer than 8″ over stock length note for fully adjustable lowering links, you may have to loosen the top and/or bottom shock bolts (without removing) to realign with link during link installation.

 

Pro-Tek LL-215S Adjustable Lowering Links 1991-1994 Honda CBR-600 F2 CBR600 F2 1995-1998 Honda CBR-600 F3 CBR600 F3 2001-2006 Honda CBR-600 F4i CBR600 F4i 1997-2003 Honda CBR-1100XX

Pro-Tek LL-215S Adjustable Lowering Links 1991-1994 Honda CBR-600 F2 CBR600 F2, 1995-1998 Honda CBR-600 F3 CBR600 F3, 2001-2006 Honda CBR-600 F4i CBR600 F4i, 1997-2003 Honda CBR-1100XX

Pro-Tek LL-215S Adjustable Lowering Links 1991-1994 Honda CBR-600 F2 CBR600 F2, 1995-1998 Honda CBR-600 F3 CBR600 F3, 2001-2006 Honda CBR-600 F4i CBR600 F4i, 1997-2003 Honda CBR-1100XX - Stainless steel rod ends are used with a carbon steel center piece to protect against binding and seizing from metal on metal corrosion when threading. Fully adjustable links allow you to make adjustments on the fly without having to unbolt the lowering link. This link is made up of a billet carbon steel center and two stainless steel rod ends with adjusting nuts to tighten down when the desired ride height is reached. These links come with infinite settings that lower the bike from stock to 4″. Ll-215s). This kit is brand new in original packaging, manufactured in the usa, and comes complete with manufacturer warranty. The cnc made center piece is gold zinc plated to protect against oxidation and corrosion. You simply turn the center piece to find desired ride height and tighten down the adjusting nuts to secure in place. It also comes with four aluminum bushings for easy fitment. There is wiggle room in shock bolts if shock is touching the link upon initial installation. You are looking at one pro-tek cnc fully adjustable lowering link that replaces the single stock link on a 1991-1994 honda cbr-600 f2, 1995-1998 honda cbr-600 f3, 2001-2006 honda cbr-600 f4i and a 1997-2003 honda cbr-1100xx (pro-tek part no. Its that easy. Note not for use with strut, air ride or swingarms longer than 8″ over stock length note for fully adjustable lowering links, you may have to loosen the top and/or bottom shock bolts (without removing) to realign with link during link installation.

 

Pro-Tek LL-230S Adjustable Lowering Links 1994-1997 Honda VFR750F VFR 750F 1999-2000 Honda CBR-600F4 CBR 600 F4 and 1993-1999 Honda CBR-900RR CBR 900 RR

Pro-Tek LL-230S Adjustable Lowering Links 1994-1997 Honda VFR750F VFR 750F, 1999-2000 Honda CBR-600F4 CBR 600 F4 and 1993-1999 Honda CBR-900RR CBR 900 RR

Pro-Tek LL-230S Adjustable Lowering Links 1994-1997 Honda VFR750F VFR 750F, 1999-2000 Honda CBR-600F4 CBR 600 F4 and 1993-1999 Honda CBR-900RR CBR 900 RR - Stainless steel rod ends are used with a carbon steel center piece to protect against binding and seizing from metal on metal corrosion when threading. You simply turn the center piece to find desired ride height and tighten down the adjusting nuts to secure in place. Fully adjustable links allow you to make adjustments on the fly without having to unbolt the lowering link. The cnc made center piece is gold zinc plated to protect against oxidation and corrosion. Its that easy. You are looking at one pro-tek cnc fully adjustable lowering link that replaces the single stock link on a 1994-1997 honda vfr-750f interceptor 750, 1999-2000 honda cbr-600 f4 and a 1993-1999 honda cbr-900rr (pro-tek part no. These links come with infinite settings that lower the bike from stock to 4″. This link is made up of a carbon steel center and two stainless steel rod ends with adjusting nuts to tighten down when the desired ride height is reached. Note not for use with strut, air ride or swingarms longer than 8″ over stock length note for fully adjustable lowering links, you may have to loosen the top and/or bottom shock bolts (without removing) to realign with link during link installation. There is wiggle room in shock bolts if shock is touching the link upon initial installation. This kit is brand new in original packaging, manufactured in the usa, and comes complete with manufacturer warranty. Ll-230s). It also comes with four aluminum bushings for easy fitment.

 

Adjustable Link Brackets for 2 x 2 Cross Member

Adjustable Link Brackets for 2 x 2 Cross Member

Adjustable Link Brackets for 2 x 2 Cross Member - Adjustable link brackets for 2″ x 2″ cross member a simple upper link mount upper adjustable link mount for a 2″x 2″ square cross-member. Holes cut to 9/16″. Cut from. 250″ steel. What’s included two (2) pieces for one complete bracket. Includes one bracket (2 pieces).

 

Concours 1400 2007 - 2017 Adjustable Kickstand Lowering Links Combo Kit

Concours 1400 (2007 – 2017) Adjustable Kickstand & Lowering Links Combo Kit

Concours 1400 (2007 – 2017) Adjustable Kickstand & Lowering Links Combo Kit - Maximum working pressure 125 psi, maximum temperature 120° f. Long life packing, graphite packing for lubricity and long life. Adjustable link, provides easy and positive adjustment of the lever lock tension. Save $10 on our lowering links and kickstands when you purchase our concours 1400 kickstand side & lowering links combo kit. Rod guide, eliminates side pull on rod, reduces wear on packing, packing nut & stem.

 

Super Tenere XTZ1200 Adjustable Kickstand  Lowering Links Combo Kit

Super Tenere XTZ1200 Adjustable Kickstand / Lowering Links Combo Kit

Super Tenere XTZ1200 Adjustable Kickstand / Lowering Links Combo Kit - The kickstand is mounted to the frame and will need to be shortened to retain the lean angle the bike needs to keep from tipping over. Keep in mind that after the bike is lowered, the kickstand will need to be shortened as well. The center hex body is stainless steel, not aluminum. Keep in mind if your motorcycle is lowered, the frame will be closer to the ground. Our super tenere xtz1200 turnbuckle style lowering links are infinitely adjustable between stock height and a 3 inch drop. No need to remove bolts and disassemble the rear suspension everytime you raise or lower your bike. Our super tenere xtz1200 adjustable kickstand side stand billet lowering kickstands use stainless steel hardware and are cnc machined from solid aluminum. They are capable of stock length to 3 inches shorter and are the strongest, best looking on the market today there are a number of adjustments to choose from, simply loosen the lock screws and set it to your desired ride height. Simply remove your stock kickstand, replace with ours, adjust and ride uses the stock kickstand spring and safety switch. Aluminum threads do not last and are dangerous if you need adjustable links that lower the bike more than 3 inches, we can do that. The ends have a 1/2″ thread and are black oxided steel, not aluminum. Don’t use a cheap kickstand and take the chance of your bike laying on its side we’ve designed the foot area of the kickstand with a radius that allows the user to fine-tune their desired lean angle. This product is a great companion for our lowering kits. If you need adjustable links that raise the bike, we can do that too. We also have raising or raising/lowering links for these bikes. This is a direct bolt-on item.

 

DRZ400 DRZ400E DRZ400S Adjustable Kickstand  Threaded Style Lowering Links Combo Kit

DRZ400, DRZ400E, DRZ400S Adjustable Kickstand / Threaded Style Lowering Links Combo Kit

DRZ400, DRZ400E, DRZ400S Adjustable Kickstand / Threaded Style Lowering Links Combo Kit - Save $10 on our lowering links and kickstands when you purchase our drz400, drz400e, drz400s adjustable kickstand adjustable kickstand / threaded style lowering links combo kit. Perfect for lowered cars wanting to keep sway bars. Adjustable length where factory links do not support. Fits 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013 mini cooper s. Easy factory direct replacement no install instructions, professional install is recommended.

 

Pro-Tek LL-290S Adjustable Lowering Links 1998-2001 Honda VFR-800FI VFR800FI 2002-2009 Honda VFR-800A VFR800 and a 2014-2015 Honda VFR-800FFD VFR800FFD

Pro-Tek LL-290S Adjustable Lowering Links 1998-2001 Honda VFR-800FI VFR800FI, 2002-2009 Honda VFR-800/A VFR800 and a 2014-2015 Honda VFR-800F/FD VFR800F/FD

Pro-Tek LL-290S Adjustable Lowering Links 1998-2001 Honda VFR-800FI VFR800FI, 2002-2009 Honda VFR-800/A VFR800 and a 2014-2015 Honda VFR-800F/FD VFR800F/FD - You are looking at one pro-tek cnc fully adjustable lowering link that replaces the single stock link on a 1998-2001 honda vfr-800fi interceptor, 2002-2009 honda vfr-800 interceptor (non abs model), 2002-2009 honda vfr-800a (abs model) and a 2014-2015 honda interceptor vfr-800f/fd deluxe (pro-tek part no. The cnc made center piece is gold zinc plated to protect against oxidation and corrosion. Fully adjustable links allow you to make adjustments on the fly without having to unbolt the lowering link. This link is made up of a billet carbon steel center and two stainless steel rod ends with adjusting nuts to tighten down when the desired ride height is reached. However, when adjusting the bike extremely low, some bikes may need a slight amount of material removed from the bottom of the shock mount for clearance. Its that easy. Ll-290s). You simply turn the center piece to find desired ride height and tighten down the adjusting nuts to secure in place. 95. Note not for use with strut, air ride or swingarms longer than 8″ over stock length note for fully adjustable lowering links, you may have to loosen the top and/or bottom shock bolts (without removing) to realign with link during link installation. Stainless steel rod ends are used with a carbon steel center piece to protect against binding and seizing from metal on metal corrosion when threading. There is wiggle room in shock bolts if shock is touching the link. It also comes with four aluminum bushings for easy fitment. These links come with infinite settings that lower the bike from 1″ to 5″. The retail price for this kit is $119. This kit is brand new in original packaging, manufactured in the usa, and comes complete with manufacturer warranty.

 

RSS Adjustable REAR Link Kit Dogbones set of 4 for ALL Porsche 996 997 Models 307

RSS Adjustable REAR Link Kit “Dogbones” (set of 4) for ALL Porsche 996 & 997 Models #307

RSS Adjustable REAR Link Kit “Dogbones” (set of 4) for ALL Porsche 996 & 997 Models #307 - Will considerably improve handling performance and feedback, eliminates rubber bushing deflection. Sold exactly as seen in photo, please see fitment guide listed below. Hard racing performance, best prices, best customer service. Lowered cars with stock arms may have additional negative camber in the rear which can prematurely wear out rear tires as the factory eccentric bolts do not offer enough adjustment to properly re-align the car to desired specifications sold in a set of 4. Proper way to correct the rear suspension geometry of lowered 996 and 997 models.

 

APDTY 016622 Rear Suspension Adjustable Lateral Control Arm Link With Ball Joint Rear Left  Right Allows For Proper Alignment Replaces 25954975 25954974 25954973 25733087 25645090 25645089

APDTY 016622 Rear Suspension Adjustable Lateral Control Arm Link With Ball Joint Rear Left / Right (Allows For Proper Alignment; Replaces 25954975 25954974 25954973 25733087 25645090 25645089)

APDTY 016622 Rear Suspension Adjustable Lateral Control Arm Link With Ball Joint Rear Left / Right (Allows For Proper Alignment; Replaces 25954975 25954974 25954973 25733087 25645090 25645089) - Brand new rear suspension lateral linkcomplete adjustable link with new ball joint allows alignment adjustmentfits rear left or rear rightsold individually purchase 2 if you need to replace or both sidesfits 2000-2005 buick lesabrefits 2006-2011 buick lucernefits 1997-2005 buick park avenuefits 1997-1999 buick rivierafits 2000-2005 cadillac devillefits 2006-2011 cadillac dtsfits 1998-2004 cadillac sevillefits 1997-2003 oldsmobile aurorafits 2000-2005 pontiac bonnevillereplaces 25954975, 25954974, 25954973, 25733087, 25645090, 25645089.

 

MaxTrac K889745SA Suspension Lift Kit 45 in Lift Incl Front And Rear Component Box KitFront And Rear Maxtrac ShocksAdjustable Link Arms Suspension Lift Kit

MaxTrac K889745SA Suspension Lift Kit 4.5 in. Lift Incl. Front And Rear Component Box Kit/Front And Rear Maxtrac Shocks/Adjustable Link Arms Suspension Lift Kit

MaxTrac K889745SA Suspension Lift Kit 4.5 in. Lift Incl. Front And Rear Component Box Kit/Front And Rear Maxtrac Shocks/Adjustable Link Arms Suspension Lift Kit - Sold exactly as seen in photo, please see fitment guide listed below. Will considerably improve handling performance and feedback, eliminates rubber bushing deflection. Hard racing performance, best prices, best customer service. Lowered cars with stock arms may have additional negative camber in the rear which can prematurely wear out rear tires as the factory eccentric bolts do not offer enough adjustment to properly re-align the car to desired specifications sold in a set of 4. Proper way to correct the rear suspension geometry of lowered 996 and 997 models.

 

KLR650 08-17 Adjustable Kickstand Double Style Lowering Links Combo Kit

KLR650 (08-17) Adjustable Kickstand & Double Style Lowering Links Combo Kit

KLR650 (08-17) Adjustable Kickstand & Double Style Lowering Links Combo Kit - Save $10 on our lowering links and kickstands when you purchase our klr650 (08-16) adjustable kickstand & double style lowering links combo kit. Include holes for adjusting ride height as noted in chart (hole 1=1in means hole 1 lowers the bike 1in, etc). Cnc machined from 7075 t6 billet aluminum for kawasaki and suzuki (except part # 1304-0175, which is made of 6061 t-6 aluminum), yamaha (except for part #s 1304-0192/0195, which are made from 7075 t-6 aluminum and honda links are constructed of 6061 t-6 billet aluminum. Increase aerodynamics for speed and performance. Polished for a show look.

 

MaxTrac K889745A Suspension Lift Kit 45 in Lift Incl Front And Rear Box KitAdjustable Link Arms Suspension Lift Kit

MaxTrac K889745A Suspension Lift Kit 4.5 in. Lift Incl. Front And Rear Box Kit/Adjustable Link Arms Suspension Lift Kit

MaxTrac K889745A Suspension Lift Kit 4.5 in. Lift Incl. Front And Rear Box Kit/Adjustable Link Arms Suspension Lift Kit - On-car adjustable without disconnecting either end, adjustment range of 39″-49″ center-to-center. Drz400, drz400e, drz400s, drz400sm these turnbuckle style lowering links are infinitely adjustable between stock height and a 4 inch drop. Works with stock and aftermarket sway bars. Front links are spaced towards the front of the car to eliminate excessive misalignment angles. Self-lubricating teflon (ptfe) races for long-life and smooth operation.