Top 18 Best Full Face Racing Helmets

 

G-Force 3026XLGWH Modified White X-Large SA10 Full Face Racing Helmet #ad

G-Force 3026XLGWH Modified White X-Large SA10 Full Face Racing Helmet

G-Force 3026XLGWH Modified White X-Large SA10 Full Face Racing Helmet #ad - Coverage is extended across the chin bar area and yet the open eye port concept is kept intact. Taken from the well received hybrid design, the modified helmet continues that tradition. Reinforced mounting points for the hans helmet restraint devices are built into the shell during production for added durability. The modified helmet is a combination of the new pro eliminator full face and the pro phenom open face helmets. This helmet is hans friendly, meaning it comes with threaded mounting points installed for use with your helmet restraint device. No drilling or modification is required. The front of the helmet is an open air design with a proactive, panoramic eye port for drivers asking for a wider field of vision. The modified helmet carries the snell sa2010 rating. The rear of the helmet is accented with double ridge lines that add both style and strength to the modified’s shell. The g-78 impact liner is covered by a soft knit, padded cooltec flame retardant liner for comfort, fit and functionality. The chin strap in the modified helmet is bolted to the shell with stainless hex-head bolts and is made from durable, flame retardant kevlar webbing. The g-force racing gear modified helmet is the enclosed cockpit racers dream. The front of the helmet is completed with a low-slope, auto racing chin bar which is different than a motorcycle, sharp-nosed design. The heart of the modified helmet is the g-78 impact liner made to meet and exceed all snell and sfi specs. The top of the eye port is covered with a visor made from tough sport grade plastic and trimmed with a glare control strip. The g-flow ventilation system draws air into the chin bar ports, around the heated interior and siphons out the top and rear vents to aid in cooling. The shell is then coated with deep, rich white gloss paint and finished with a protective clear coat outer layer. The outer contact shell is made from a low density, lightweight z38 fiberglass, carbon kevlar composite blend.

 

G-Force 3006XLGWH Modified White X-Large Full Face Racing Helmet #ad

G-Force 3006XLGWH Modified White X-Large Full Face Racing Helmet

G-Force 3006XLGWH Modified White X-Large Full Face Racing Helmet #ad - The shell is then coated with deep, rich white gloss paint and finished with a protective clear coat outer layer. The g-flow ventilation system draws air into the chin bar ports, around the heated interior and siphons out the top and rear vents to aid in cooling. A specfit channel has been added to secure placement in the use of seeing or sunglasses. The rear of the helmet is accented with double ridge lines that add both style and strength to the modified’s shell. Reinforced mounting points for the hans helmet restraint devices are built into the shell during production for added durability. Coverage is extended across the chin bar area and yet the open eye port concept is kept in tact. The chin strap in the modified helmet is bolted to the shell with stainless hex-head bolts and is made from durable, flame retardant kevlar webbing. The modified helmet is a combination of the new pro eliminator full face and the pro phenom open face helmets. The top of the eye port is covered with a visor made from tough sport grade plastic and trimmed with a glare control strip. The g-78 impact liner is covered by a soft knit, padded cooltec flame retardant liner for comfort, fit and functionality. 1/2005 rating. The g-force modified helmet is taken from the well received hybrid design, the modified continues that tradition. Available in white. The front of the helmet is completed with a low-slope, auto racing chin bar which is different than a motorcycle, sharp-nosed design. The outer contact shell is made from a low density, lightweight z38 fiberglass, carbon kevlar composite blend. The front of the helmet is an open air design with a proactive, panoramic eye port for drivers asking for a wider field of vision. The modified helmet carries both the snell sa2005 and sfi 31. The heart of the modified helmet is the g-78 impact liner made to meet and exceed all snell and sfi specs.

 

G-Force 3007XLGWH SideDraft White X-Large Full Face Racing Helmet #ad

G-Force 3007XLGWH SideDraft White X-Large Full Face Racing Helmet

G-Force 3007XLGWH SideDraft White X-Large Full Face Racing Helmet #ad - The g-flow side air intake ventilation system then drawls air around the heated interior and siphons out the top and rear vents to aid in cooling. This is a second generation helmet taken from the pro force air helmet, the sidedraft is a superior design. The rear of the helmet is accented with double ridge lines that add both style and strength to the side draft’s shell. The g-force sidedraft is the expert professional’s choice for comfort inside the car. The heart of the modified helmet is the g-78 impact liner made to meet and exceed all snell and sfi specs. The outer contact shell is made from a low density, lightweight z38 fiberglass, carbon kevlar composite blend. 1/2005 rating. The side and front of the helmet is equipped with a low profile quality air intake nozzle that accepts most forced air system hoses and channels the cooled air into the shell. The g-78 impact liner is covered by a soft knit, padded cooltec flame retardant liner for comfort, fit and functionality. The front of the helmet is completed with a low-slope, auto racing chin bar which is different than a motorcycle, sharp-nosed design. A specfit channel has been added to secure placement in the use of seeing or sunglasses. The g-force sidedraft helmet provides a forced air option for heated, on-track situations. The sidedraft helmet carries both the snell sa2005 and sfi 31. The helmet is then coated with deep, rich white gloss paint and finished with a protective clear coat outer layer. Reinforced mounting points for the hans helmet restraint devices are built into the shell during production for added durability. On the inside, g-force has produced the most user friendly, comfortable helmet on the market. The chin strap in the sidedraft helmet is bolted to the shell with stainless hex-head bolts and is made from durable, flame retardant kevlar webbing.

 

G-Force 3025XSMBK Pro Vintage Black X-Small SA10 Full Face Racing Helmet #ad

G-Force 3025XSMBK Pro Vintage Black X-Small SA10 Full Face Racing Helmet

G-Force 3025XSMBK Pro Vintage Black X-Small SA10 Full Face Racing Helmet #ad - No drilling or modification is required. Reinforced mounting points for the hans helmet restraint devices are built into the shell during production for added durability. The g-flow ventilation system draws air into the chin bar ports, around the heated interior and siphons out the top and rear vents to aid in cooling. 125 inch thick, profit shield encloses the extra wide eye port opening and secures to the rubberized, eye port gasket to keep dust and dirt out. On the inside, g-force racing gear has produced the most user friendly and comfortable helmet. The outer contact shell is made from a low density, lightweight z38 fiberglass, carbon and kevlar composite blend. This racing gear pro vintage is the most eye catching, snell sa2005 rated helmet. The chin strap in the eliminator helmet is bolted to the shell with stainless hex-head bolts and is made from durable kevlar webbing. The pivot kit contains 5 shield ratchet positions so that the driver can adjust it to their liking. The front of the helmet is completed with a smooth-slope, auto racing chin bar which is different than a motorcycle, sharp-nosed design. The heart of the eliminator helmet is the g-78 impact liner which is covered by a soft knit, flame retardant liner for comfort, fit and functionality. This helmet is hans friendly, meaning it comes with threaded mounting points installed for use with your helmet restraint device. An optically correct,. The thumb indention makes lifting the shield, even with gloves, simple and clean. The rear of the helmet is accented with double ridge lines that add both style and strength to the pro vintage’s shell. The shell is then coated with either deep, rich white or black gloss paint or as a new option, a matte black undercoat, covered with flame and checkered flag patterned airbrushed and finished with a protective clear coat outer layer. This shield is held in place by two aircraft aluminum, wide-head bolts for easy change-out and removal.

 

G-Force 3028MEDBK Pro CFG Black Medium SA10 Full Face Racing Helmet #ad

G-Force 3028MEDBK Pro CFG Black Medium SA10 Full Face Racing Helmet

G-Force 3028MEDBK Pro CFG Black Medium SA10 Full Face Racing Helmet #ad - The pivot kit contains 5 shield ratchet positions so that the driver can adjust to their liking. The front of the helmet is completed with a smooth-slope, auto racing chin bar which is different than a motorcycle, sharp-nosed design. The profit shield is held in place by two aircraft aluminum, wide-head bolts for easy change-out and removal. An optically correct,. The g-flow ventilation system siphons air into the chin bar ports, around the heated interior and siphons out the top and rear vents to aid in cooling. The all new model is constructed of a carbon fiber shell, multi-density liner made with conehead technology and covered with a soft knit, flame retardant liner. The shell is capped with striking centerline graphic which will help separate you from the pack. 125 inch thick, profit shield encloses the extra wide eye port opening and secures to the rubberized, eye port gasket to keep dust and dirt out. G-force racing gear is proud to bring you the new cfg carbon fiber snell sa2010 helmet. Reinforced mounting points for the hans helmet restraint devices are built into the shell during production for added durability. The thumb indention makes lifting the shield, even with gloves, simple and clean.

 

G-Force 3005XXLWH Pro Eliminator X White XX-Large Full Face Racing Helmet #ad

G-Force 3005XXLWH Pro Eliminator X White XX-Large Full Face Racing Helmet

G-Force 3005XXLWH Pro Eliminator X White XX-Large Full Face Racing Helmet #ad - Reinforced mounting points for hans helmet restraint systems. Flamed and checkered, hand airbrushed appearing graphics under clear coating. Available in gloss white, gloss black and new matte black. Cooltec flame retardant liner g-flow ventilation system. Lightweight fiberglass, carbon and kevlar composite shell.

 

G-Force 3025LRGMB Pro Vintage Matte Black Large SA10 Full Face Racing Helmet #ad

G-Force 3025LRGMB Pro Vintage Matte Black Large SA10 Full Face Racing Helmet

G-Force 3025LRGMB Pro Vintage Matte Black Large SA10 Full Face Racing Helmet #ad - The rear of the helmet is accented with double ridge lines that add both style and strength to the pro vintage’s shell. On the inside, g-force racing gear has produced the most user friendly and comfortable helmet. An optically correct,. The front of the helmet is completed with a smooth-slope, auto racing chin bar which is different than a motorcycle, sharp-nosed design. The shell is then coated with either deep, rich white or black gloss paint or as a new option, a matte black undercoat, covered with flame and checkered flag patterned airbrushed and finished with a protective clear coat outer layer. No drilling or modification is required. 125 inch thick, profit shield encloses the extra wide eye port opening and secures to the rubberized, eye port gasket to keep dust and dirt out. The heart of the eliminator helmet is the g-78 impact liner which is covered by a soft knit, flame retardant liner for comfort, fit and functionality. The g-flow ventilation system draws air into the chin bar ports, around the heated interior and siphons out the top and rear vents to aid in cooling. This shield is held in place by two aircraft aluminum, wide-head bolts for easy change-out and removal. The outer contact shell is made from a low density, lightweight z38 fiberglass, carbon and kevlar composite blend. This racing gear pro vintage is the most eye catching, snell sa2005 rated helmet. Reinforced mounting points for the hans helmet restraint devices are built into the shell during production for added durability. This helmet is hans friendly, meaning it comes with threaded mounting points installed for use with your helmet restraint device. The pivot kit contains 5 shield ratchet positions so that the driver can adjust it to their liking. The thumb indention makes lifting the shield, even with gloves, simple and clean. The chin strap in the eliminator helmet is bolted to the shell with stainless hex-head bolts and is made from durable kevlar webbing.

 

G-Force 3025MEDWH Pro Vintage White Medium SA10 Full Face Racing Helmet #ad

G-Force 3025MEDWH Pro Vintage White Medium SA10 Full Face Racing Helmet

G-Force 3025MEDWH Pro Vintage White Medium SA10 Full Face Racing Helmet #ad - On the inside, g-force racing gear has produced the most user friendly and comfortable helmet. An optically correct,. The g-flow ventilation system draws air into the chin bar ports, around the heated interior and siphons out the top and rear vents to aid in cooling. Reinforced mounting points for the hans helmet restraint devices are built into the shell during production for added durability. The chin strap in the eliminator helmet is bolted to the shell with stainless hex-head bolts and is made from durable kevlar webbing. The pivot kit contains 5 shield ratchet positions so that the driver can adjust it to their liking. This helmet is hans friendly, meaning it comes with threaded mounting points installed for use with your helmet restraint device. The heart of the eliminator helmet is the g-78 impact liner which is covered by a soft knit, flame retardant liner for comfort, fit and functionality. The thumb indention makes lifting the shield, even with gloves, simple and clean. This shield is held in place by two aircraft aluminum, wide-head bolts for easy change-out and removal. 125 inch thick, profit shield encloses the extra wide eye port opening and secures to the rubberized, eye port gasket to keep dust and dirt out. The rear of the helmet is accented with double ridge lines that add both style and strength to the pro vintage’s shell. The front of the helmet is completed with a smooth-slope, auto racing chin bar which is different than a motorcycle, sharp-nosed design. The outer contact shell is made from a low density, lightweight z38 fiberglass, carbon and kevlar composite blend. The shell is then coated with either deep, rich white or black gloss paint or as a new option, a matte black undercoat, covered with flame and checkered flag patterned airbrushed and finished with a protective clear coat outer layer. No drilling or modification is required. This racing gear pro vintage is the most eye catching, snell sa2005 rated helmet.

 

G-Force 3023MEDMB Pro Eliminator Matte Black Medium SA10 Full Face Racing Helmet #ad

G-Force 3023MEDMB Pro Eliminator Matte Black Medium SA10 Full Face Racing Helmet

G-Force 3023MEDMB Pro Eliminator Matte Black Medium SA10 Full Face Racing Helmet #ad - Reinforced mounting points for the hans helmet restraint devices are built into the shell during production for added durability. The front of the helmet is completed with a smooth-slope, auto racing chin bar which is different than a motorcycle, sharp-nosed design. The pivot kit contains 5 shield ratchet positions so that the driver can adjust to their liking. The chin strap in the pro eliminator helmet is bolted to the shell with stainless hex-head bolts and is made from durable, flame retardant kevlar webbing. A sleek new design from g-force racing gear, the pro eliminator has provided a new benchmark in quality, functionality and style. The rear of the helmet is accented with double ridge lines that add both style and strength to the pro eliminator’s shell. An optically correct,. No drilling or modification is required. The thumb indention makes lifting the shield, even with gloves, simple and clean. This helmet is hans friendly, meaning it comes with threaded mounting points installed for use with your helmet restraint device. The g-flow ventilation system siphons air into the chin bar ports, around the heated interior and siphons out the top and rear vents to aid in cooling. The outer contact shell is made from a low density, lightweight z38 fiberglass, carbon, and kevlar composite blend. The profit shield is held in place by two aircraft aluminum, wide-head bolts for easy change-out and removal. It is covered by a soft knit, hypoallergenic, padded cooltec, flame retardant liner for comfort and fit. The heart of the pro eliminator helmet is the g-78 impact liner made to meet and exceed all snell and sfi specs. 125 inch thick, profit shield encloses the extra wide eye port opening and secures to the rubberized, eye port gasket to keep dust and dirt out. The shell is then coated with deep, rich white or black gloss, or matte black paint and finished with a protective clear coat outer layer.

 

G-Force 3023XSMBK Pro Eliminator Black X-Small SA10 Full Face Racing Helmet #ad

G-Force 3023XSMBK Pro Eliminator Black X-Small SA10 Full Face Racing Helmet

G-Force 3023XSMBK Pro Eliminator Black X-Small SA10 Full Face Racing Helmet #ad - The rear of the helmet is accented with double ridge lines that add both style and strength to the pro eliminator’s shell. 125 inch thick, profit shield encloses the extra wide eye port opening and secures to the rubberized, eye port gasket to keep dust and dirt out. An optically correct,. The g-flow ventilation system siphons air into the chin bar ports, around the heated interior and siphons out the top and rear vents to aid in cooling. A sleek new design from g-force racing gear, the pro eliminator has provided a new benchmark in quality, functionality and style. The heart of the pro eliminator helmet is the g-78 impact liner made to meet and exceed all snell and sfi specs. The pivot kit contains 5 shield ratchet positions so that the driver can adjust to their liking. The shell is then coated with deep, rich white or black gloss, or matte black paint and finished with a protective clear coat outer layer. Reinforced mounting points for the hans helmet restraint devices are built into the shell during production for added durability. The outer contact shell is made from a low density, lightweight z38 fiberglass, carbon, and kevlar composite blend. It is covered by a soft knit, hypoallergenic, padded cooltec, flame retardant liner for comfort and fit. The chin strap in the pro eliminator helmet is bolted to the shell with stainless hex-head bolts and is made from durable, flame retardant kevlar webbing. The thumb indention makes lifting the shield, even with gloves, simple and clean. The front of the helmet is completed with a smooth-slope, auto racing chin bar which is different than a motorcycle, sharp-nosed design. The profit shield is held in place by two aircraft aluminum, wide-head bolts for easy change-out and removal. No drilling or modification is required. This helmet is hans friendly, meaning it comes with threaded mounting points installed for use with your helmet restraint device.

 

G-Force 3025MEDBK Pro Vintage Black Medium SA10 Full Face Racing Helmet #ad

G-Force 3025MEDBK Pro Vintage Black Medium SA10 Full Face Racing Helmet

G-Force 3025MEDBK Pro Vintage Black Medium SA10 Full Face Racing Helmet #ad - Reinforced mounting points for the hans helmet restraint devices are built into the shell during production for added durability. The chin strap in the eliminator helmet is bolted to the shell with stainless hex-head bolts and is made from durable kevlar webbing. An optically correct,. This helmet is hans friendly, meaning it comes with threaded mounting points installed for use with your helmet restraint device. The thumb indention makes lifting the shield, even with gloves, simple and clean. This shield is held in place by two aircraft aluminum, wide-head bolts for easy change-out and removal. No drilling or modification is required. The rear of the helmet is accented with double ridge lines that add both style and strength to the pro vintage’s shell. The front of the helmet is completed with a smooth-slope, auto racing chin bar which is different than a motorcycle, sharp-nosed design. The pivot kit contains 5 shield ratchet positions so that the driver can adjust it to their liking. This racing gear pro vintage is the most eye catching, snell sa2005 rated helmet. The outer contact shell is made from a low density, lightweight z38 fiberglass, carbon and kevlar composite blend. The heart of the eliminator helmet is the g-78 impact liner which is covered by a soft knit, flame retardant liner for comfort, fit and functionality. On the inside, g-force racing gear has produced the most user friendly and comfortable helmet. The shell is then coated with either deep, rich white or black gloss paint or as a new option, a matte black undercoat, covered with flame and checkered flag patterned airbrushed and finished with a protective clear coat outer layer. The g-flow ventilation system draws air into the chin bar ports, around the heated interior and siphons out the top and rear vents to aid in cooling. 125 inch thick, profit shield encloses the extra wide eye port opening and secures to the rubberized, eye port gasket to keep dust and dirt out.

 

G-Force 3023SMLWH Pro Eliminator White Small SA10 Full Face Racing Helmet #ad

G-Force 3023SMLWH Pro Eliminator White Small SA10 Full Face Racing Helmet

G-Force 3023SMLWH Pro Eliminator White Small SA10 Full Face Racing Helmet #ad - The g-flow ventilation system siphons air into the chin bar ports, around the heated interior and siphons out the top and rear vents to aid in cooling. The front of the helmet is completed with a smooth-slope, auto racing chin bar which is different than a motorcycle, sharp-nosed design. A sleek new design from g-force racing gear, the pro eliminator has provided a new benchmark in quality, functionality and style. No drilling or modification is required. The pivot kit contains 5 shield ratchet positions so that the driver can adjust to their liking. 125 inch thick, profit shield encloses the extra wide eye port opening and secures to the rubberized, eye port gasket to keep dust and dirt out. The chin strap in the pro eliminator helmet is bolted to the shell with stainless hex-head bolts and is made from durable, flame retardant kevlar webbing. This helmet is hans friendly, meaning it comes with threaded mounting points installed for use with your helmet restraint device. Reinforced mounting points for the hans helmet restraint devices are built into the shell during production for added durability. The heart of the pro eliminator helmet is the g-78 impact liner made to meet and exceed all snell and sfi specs. The rear of the helmet is accented with double ridge lines that add both style and strength to the pro eliminator’s shell. The outer contact shell is made from a low density, lightweight z38 fiberglass, carbon, and kevlar composite blend. The profit shield is held in place by two aircraft aluminum, wide-head bolts for easy change-out and removal. An optically correct,. It is covered by a soft knit, hypoallergenic, padded cooltec, flame retardant liner for comfort and fit. The shell is then coated with deep, rich white or black gloss, or matte black paint and finished with a protective clear coat outer layer. The thumb indention makes lifting the shield, even with gloves, simple and clean.

 

G-Force 3023XXLWH Pro Eliminator White XX-Large SA10 Full Face Racing Helmet #ad

G-Force 3023XXLWH Pro Eliminator White XX-Large SA10 Full Face Racing Helmet

G-Force 3023XXLWH Pro Eliminator White XX-Large SA10 Full Face Racing Helmet #ad - A sleek new design from g-force racing gear, the pro eliminator has provided a new benchmark in quality, functionality and style. The profit shield is held in place by two aircraft aluminum, wide-head bolts for easy change-out and removal. The heart of the pro eliminator helmet is the g-78 impact liner made to meet and exceed all snell and sfi specs. The front of the helmet is completed with a smooth-slope, auto racing chin bar which is different than a motorcycle, sharp-nosed design. An optically correct,. The thumb indention makes lifting the shield, even with gloves, simple and clean. The pivot kit contains 5 shield ratchet positions so that the driver can adjust to their liking. Reinforced mounting points for the hans helmet restraint devices are built into the shell during production for added durability. This helmet is hans friendly, meaning it comes with threaded mounting points installed for use with your helmet restraint device. It is covered by a soft knit, hypoallergenic, padded cooltec, flame retardant liner for comfort and fit. The chin strap in the pro eliminator helmet is bolted to the shell with stainless hex-head bolts and is made from durable, flame retardant kevlar webbing. The outer contact shell is made from a low density, lightweight z38 fiberglass, carbon, and kevlar composite blend. The shell is then coated with deep, rich white or black gloss, or matte black paint and finished with a protective clear coat outer layer. The rear of the helmet is accented with double ridge lines that add both style and strength to the pro eliminator’s shell. 125 inch thick, profit shield encloses the extra wide eye port opening and secures to the rubberized, eye port gasket to keep dust and dirt out. No drilling or modification is required. The g-flow ventilation system siphons air into the chin bar ports, around the heated interior and siphons out the top and rear vents to aid in cooling.

 

G-Force 3027XXLWH Side Draft White XX-Large SA10 Full Face Racing Helmet #ad

G-Force 3027XXLWH Side Draft White XX-Large SA10 Full Face Racing Helmet

G-Force 3027XXLWH Side Draft White XX-Large SA10 Full Face Racing Helmet #ad - The chin strap in the modified helmet is bolted to the shell with stainless hex-head bolts and is made from durable, flame retardant kevlar webbing. Reinforced mounting points for the hans helmet restraint devices are built into the shell during production for added durability. The g-force racing gear modified helmet is the enclosed cockpit racers dream. The front of the helmet is completed with a low-slope, auto racing chin bar which is different than a motorcycle, sharp-nosed design. Taken from the well received hybrid design, the modified helmet continues that tradition. The front of the helmet is an open air design with a proactive, panoramic eye port for drivers asking for a wider field of vision. The heart of the modified helmet is the g-78 impact liner made to meet and exceed all snell and sfi specs. The g-flow ventilation system draws air into the chin bar ports, around the heated interior and siphons out the top and rear vents to aid in cooling. The modified helmet carries the snell sa2010 rating. The g-78 impact liner is covered by a soft knit, padded cooltec flame retardant liner for comfort, fit and functionality. The rear of the helmet is accented with double ridge lines that add both style and strength to the modified’s shell. The top of the eye port is covered with a visor made from tough sport grade plastic and trimmed with a glare control strip. This helmet is hans friendly, meaning it comes with threaded mounting points installed for use with your helmet restraint device. The outer contact shell is made from a low density, lightweight z38 fiberglass, carbon kevlar composite blend. The modified helmet is a combination of the new pro eliminator full face and the pro phenom open face helmets. The shell is then coated with deep, rich white gloss paint and finished with a protective clear coat outer layer. Coverage is extended across the chin bar area and yet the open eye port concept is kept intact. No drilling or modification is required.

 

G-Force 3023LRGBK Pro Eliminator Black Large SA10 Full Face Racing Helmet #ad

G-Force 3023LRGBK Pro Eliminator Black Large SA10 Full Face Racing Helmet

G-Force 3023LRGBK Pro Eliminator Black Large SA10 Full Face Racing Helmet #ad - The profit shield is held in place by two aircraft aluminum, wide-head bolts for easy change-out and removal. The g-flow ventilation system siphons air into the chin bar ports, around the heated interior and siphons out the top and rear vents to aid in cooling. The thumb indention makes lifting the shield, even with gloves, simple and clean. The heart of the pro eliminator helmet is the g-78 impact liner made to meet and exceed all snell and sfi specs. No drilling or modification is required. Reinforced mounting points for the hans helmet restraint devices are built into the shell during production for added durability. The front of the helmet is completed with a smooth-slope, auto racing chin bar which is different than a motorcycle, sharp-nosed design. The rear of the helmet is accented with double ridge lines that add both style and strength to the pro eliminator’s shell. The pivot kit contains 5 shield ratchet positions so that the driver can adjust to their liking. 125 inch thick, profit shield encloses the extra wide eye port opening and secures to the rubberized, eye port gasket to keep dust and dirt out. An optically correct,. A sleek new design from g-force racing gear, the pro eliminator has provided a new benchmark in quality, functionality and style. It is covered by a soft knit, hypoallergenic, padded cooltec, flame retardant liner for comfort and fit. The outer contact shell is made from a low density, lightweight z38 fiberglass, carbon, and kevlar composite blend. The chin strap in the pro eliminator helmet is bolted to the shell with stainless hex-head bolts and is made from durable, flame retardant kevlar webbing. This helmet is hans friendly, meaning it comes with threaded mounting points installed for use with your helmet restraint device. The shell is then coated with deep, rich white or black gloss, or matte black paint and finished with a protective clear coat outer layer.

 

G-Force 3027MEDWH Side Draft White Medium SA10 Full Face Racing Helmet #ad

G-Force 3027MEDWH Side Draft White Medium SA10 Full Face Racing Helmet

G-Force 3027MEDWH Side Draft White Medium SA10 Full Face Racing Helmet #ad - The rear of the helmet is accented with double ridge lines that add both style and strength to the modified’s shell. Reinforced mounting points for the hans helmet restraint devices are built into the shell during production for added durability. The outer contact shell is made from a low density, lightweight z38 fiberglass, carbon kevlar composite blend. The g-78 impact liner is covered by a soft knit, padded cooltec flame retardant liner for comfort, fit and functionality. Coverage is extended across the chin bar area and yet the open eye port concept is kept intact. The modified helmet carries the snell sa2010 rating. The top of the eye port is covered with a visor made from tough sport grade plastic and trimmed with a glare control strip. The heart of the modified helmet is the g-78 impact liner made to meet and exceed all snell and sfi specs. The front of the helmet is an open air design with a proactive, panoramic eye port for drivers asking for a wider field of vision. The chin strap in the modified helmet is bolted to the shell with stainless hex-head bolts and is made from durable, flame retardant kevlar webbing. No drilling or modification is required. The modified helmet is a combination of the new pro eliminator full face and the pro phenom open face helmets. The shell is then coated with deep, rich white gloss paint and finished with a protective clear coat outer layer. This helmet is hans friendly, meaning it comes with threaded mounting points installed for use with your helmet restraint device. The g-flow ventilation system draws air into the chin bar ports, around the heated interior and siphons out the top and rear vents to aid in cooling. The front of the helmet is completed with a low-slope, auto racing chin bar which is different than a motorcycle, sharp-nosed design. Taken from the well received hybrid design, the modified helmet continues that tradition. The g-force racing gear modified helmet is the enclosed cockpit racers dream.

 

G-Force 3004XSMBK Eliminator X Black X-Small Full Face Racing Helmet #ad

G-Force 3004XSMBK Eliminator X Black X-Small Full Face Racing Helmet

G-Force 3004XSMBK Eliminator X Black X-Small Full Face Racing Helmet #ad - The eliminator x is g-force’s snell m2005 rated helmet for the racer that takes pride in both value and good looks. 1/2005 rating. The heart of the eliminator x helmet is the g-78 impact liner made to meet and exceed all snell and sfi specs. The rear of the helmet is accented with double ridge lines that add both style and strength to the eliminator x’s shell. The pivot kit contains 5 shield ratchet positions so that the driver can adjust to their liking. The chin strap in the eliminator x helmet is bolted to the shell with stainless hex-head bolts and is made from durable nylon webbing. The thumb indention makes lifting the shield, even with gloves, simple and clean. The g-78 impact liner is covered by a soft knit, hypoallergenic, padded nylon liner for comfort and fit. An optically correct,. The eliminator helmet carries both the snell m2005 and sfi 41. 125 inch thick, profit shield encloses the extra wide eye port opening and secures to the eye port gasket to keep dust and dirt out. Reinforced mounting points for the hans helmet restraint devices are built into the shell during production for added durability. The g-flow ventilation system pulls air into the chin bar ports, around the heated interior and siphons out the top and rear vents to aid in cooling. The front of the helmet is completed with a smooth-slope, auto racing chin bar which is different than a motorcycle, sharp-nosed design. A specfit channel has been added to secure placement in the use of prescription or sunglasses. The profit shield is held in place by two aircraft aluminum, wide-head bolts. The shell is then coated with deep, rich white or black gloss paint, covered with flame and checkered flag patterned, airbrushed appearing graphics and finished with a protective clear coat outer layer. The outer contact shell is made from a low density, lightweight z38 fiberglass, carbon and kevlar composite blend.

 

G-Force 3023MEDWH Pro Eliminator White Medium SA10 Full Face Racing Helmet #ad

G-Force 3023MEDWH Pro Eliminator White Medium SA10 Full Face Racing Helmet

G-Force 3023MEDWH Pro Eliminator White Medium SA10 Full Face Racing Helmet #ad - This helmet is hans friendly, meaning it comes with threaded mounting points installed for use with your helmet restraint device. The profit shield is held in place by two aircraft aluminum, wide-head bolts for easy change-out and removal. Reinforced mounting points for the hans helmet restraint devices are built into the shell during production for added durability. The heart of the pro eliminator helmet is the g-78 impact liner made to meet and exceed all snell and sfi specs. The pivot kit contains 5 shield ratchet positions so that the driver can adjust to their liking. 125 inch thick, profit shield encloses the extra wide eye port opening and secures to the rubberized, eye port gasket to keep dust and dirt out. The front of the helmet is completed with a smooth-slope, auto racing chin bar which is different than a motorcycle, sharp-nosed design. The chin strap in the pro eliminator helmet is bolted to the shell with stainless hex-head bolts and is made from durable, flame retardant kevlar webbing. A sleek new design from g-force racing gear, the pro eliminator has provided a new benchmark in quality, functionality and style. The thumb indention makes lifting the shield, even with gloves, simple and clean. The shell is then coated with deep, rich white or black gloss, or matte black paint and finished with a protective clear coat outer layer. The outer contact shell is made from a low density, lightweight z38 fiberglass, carbon, and kevlar composite blend. An optically correct,. It is covered by a soft knit, hypoallergenic, padded cooltec, flame retardant liner for comfort and fit. The rear of the helmet is accented with double ridge lines that add both style and strength to the pro eliminator’s shell. The g-flow ventilation system siphons air into the chin bar ports, around the heated interior and siphons out the top and rear vents to aid in cooling. No drilling or modification is required.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.