Top 22 Best Brake Line Tubings

 

Stainless Steel Brake Line Tubing Kit 14 OD 20 Foot Coil Roll AN 45 Flare USA L-4-1 #ad

Stainless Steel Brake Line Tubing Kit 1/4 OD 20 Foot Coil Roll AN 45 Flare USA (L-4-1)

Stainless Steel Brake Line Tubing Kit 1/4 OD 20 Foot Coil Roll AN 45 Flare USA (L-4-1) #ad - Fully annealed. We bend and flare hundreds of miles of this tube each year. The rockwell hardness of steel tube is. 74, so it is the softest on the market but still a bit harder than steel tube. This is a exact inline tube reproduction of the original. • Hardness (rockwell 30t scale) 74 • clean finish inside and out • leak and vibration resistance. 60 and this stainless is. Our 1/4″ stainless steel tubing is made from 304 grade (rated at 6000 psi) which is double annealed to allow easy flaring. You must have a good flare too to flare stainless. 028 wall thickness. 028 (. This can be used with an and 45 degree double flare fittings. 70mm) • elongation in 2″ (50mm) = 14% yield strength 24,656 psi tensile strength 42,061 psi working pressure 4,500 psi burst pressure 17, 900 psi these are exact to the factory originals and have all the details, they are the correct size and shape with the correct color. Inline tube stainless steel brake line coil 1/4″ x 20 foot all inline tube tubing conforms to the following • wall thickness =. 1/4-304 stainless steel brake line coil tube, 20 ft, standard automotive spec 1/4 od,.

 

716-24 Inverted Flare Red Zinc Tube Nut Fitting 316 Brake Line Tubing 6pc TN06 D-3-12 #ad

7/16-24 Inverted Flare Red Zinc Tube Nut Fitting 3/16 Brake Line Tubing 6pc TN06 (D-3-12)

7/16-24 Inverted Flare Red Zinc Tube Nut Fitting 3/16 Brake Line Tubing 6pc TN06 (D-3-12) #ad - Oem brake line fitting for 3/16″ or 4. 70 mm tubing, thread 7/16-24, hex head 7/16″, oal. 350, finish red zinc. Gm/ford master cylinder. 565, length of thread. Sae 3/16 tube size x 7/16-24 thread size steel brake line tube nuts for 3/16″ steel brake line tubing inverted flare standard 7/16″-24 thread.

 

SUR&R Auto Parts SRRBREZ10050 316 Brake Line Tubing 50 #ad

SUR&R Auto Parts (SRRBREZ10050) 3/16″ Brake Line Tubing 50′

SUR&R Auto Parts (SRRBREZ10050) 3/16″ Brake Line Tubing 50′ #ad - Align, bend and adjust 3/16″ and 1/4″ brake and fuel lines with a twist of the wrist. Shaped jaws bend tubing without distortion. Price for each finish matte package quantity 1 item brake line tubing length 50 ft tube size 3/16″ od material copper nickel type tubing application steel brake lines, hydraulic brakes country of origin (subject to change) united states.

 

Copper Nickel Brake Line Tubing Kit 14 OD 25 Foot Coil Roll USA INLINE TUBE CN4 L-5-5 #ad

Copper Nickel Brake Line Tubing Kit 1/4 OD 25 Foot Coil Roll USA INLINE TUBE CN4 (L-5-5)

Copper Nickel Brake Line Tubing Kit 1/4 OD 25 Foot Coil Roll USA INLINE TUBE CN4 (L-5-5) #ad - It is manufactured by inline tube. Worth the extra cost over zinc or stainless if you are bending your own with no experience. Easy to work with. This is the softest tube on the market, bend by hand flare with any flare tool, even the cheapest lowest tool will still flare this tube. Used for all automotive applications,. Yield strength 24,656 psi tensile strength 42,061 psi working pressure 4,500 psi burst pressure 17, 900 psi copper nickel. 028″ wall thickness so that it is easy to flare, bend and install.

 

25 ft Zinc Plated 316 Brake Line Tubing w metric brake line ISOBubble Flare fittings  Pack of 16 fittings #ad

25 ft. Zinc Plated 3/16″ Brake Line Tubing w/ metric brake line ISO/Bubble Flare fittings . (Pack of 16 fittings)

25 ft. Zinc Plated 3/16″ Brake Line Tubing w/ metric brake line ISO/Bubble Flare fittings . (Pack of 16 fittings) #ad - Kit includes everything you need to plumb a great brake line set. 5, 2, 12x1mm, 2, 13×1. There are a total of 16 fittings (10, 10x1mm, 2, 11×1. Roll of 3/16″ zinc plated brake line tubing and the most popular iso/bubble flare fittings for 3/16″ tube. Kit includes a 25 ft. 5mm) included.

 

25 ft Zinc Plated 316 Brake Line Tubing w metric brake Line invert flare fittings 10 x 1 mm Pack of 10 fittings #ad

25 ft. Zinc Plated 3/16″ Brake Line Tubing w/ metric brake Line invert flare fittings. 10 x 1 mm (Pack of 10 fittings)

25 ft. Zinc Plated 3/16″ Brake Line Tubing w/ metric brake Line invert flare fittings. 10 x 1 mm (Pack of 10 fittings) #ad - Kit includes a 25 ft. There are a total of 10 fittings (10 mm nuts with a thread pitch of 1 mm) included. Roll of 3/16″ zinc plated brake line tubing and 10 metric inverted flare brake line fittings. Kit includes everything you need to plumb a great brake line set.

 

OE Zinc Automotive Steel Brake Line Tubing Kit 14 OD Coil Roll L-2-1 #ad

OE Zinc Automotive Steel Brake Line Tubing Kit 1/4 OD Coil Roll (L-2-1)

OE Zinc Automotive Steel Brake Line Tubing Kit 1/4 OD Coil Roll (L-2-1) #ad - 028 wall thickness. 028″ wall thickness so that it is easy to flare, bend and install. It is manufactured by inline tube. 1 coil. 1/4″ oem brake line coil tube zinc coated / copper lined, 25 ft, standard automotive spec 1/4 od,. Used for all automotive applications,. This is one roll of 1/4 brake line.

 

Inside Brake Line Tubing Deburring Tool 18-12 Stainless OEM Copper Nickel C-1-8 #ad

Inside Brake Line Tubing Deburring Tool 1/8″-1/2″ Stainless OEM Copper Nickel (C-1-8)

Inside Brake Line Tubing Deburring Tool 1/8″-1/2″ Stainless OEM Copper Nickel (C-1-8) #ad - This tool is designed to debur the inside of tubing from 1/8″ to 1/2″ diameter. This is a professional grade tool and it is easy to use. Inline tube inside brake tubing deburring tool for 1/8″-1/2″ diameter tubing. 1 piece each.

 

Copper Nickel Brake Line Tubing Kit 316 25 Foot Coil Roll Fittings Spring Wrap L-5-4  L-3-2  L-3-5 #ad

Copper Nickel Brake Line Tubing Kit 3/16 25 Foot Coil Roll Fittings Spring Wrap (L-5-4 + L-3-2 + L-3-5)

Copper Nickel Brake Line Tubing Kit 3/16 25 Foot Coil Roll Fittings Spring Wrap (L-5-4 + L-3-2 + L-3-5) #ad - Cn3, oem spec, automotive 3/16″ copper cupro nickel brake line 25′ coil, 1 roll & fpm01 brake line fittings 3/8-24, 7/16-24, 1/2-20, 9/16-18 (this is the most common standard fittings in the automotive industry). & 5 foot of stainless spring wrap. This is one roll of 3/16 brake line. Worth the extra cost over zinc or stainless if you are bending your own with no experience. 028″ wall thickness so that it is easy to flare, bend and install. This is the softest tube on the market, bend by hand flare with any flare tool, even the cheapest lowest tool will still flare this tube. Used for all automotive applications,. It is manufactured by inline tube. Easy to work with.

 

Roll  Coil of 25 ft Zinc Plated 316 Brake Line Tubing #ad

Roll / Coil of 25 ft. Zinc Plated 3/16″ Brake Line Tubing

Roll / Coil of 25 ft. Zinc Plated 3/16″ Brake Line Tubing #ad - Many local parts stores rent out flaring tools free. Bends and flares well.

 

ABN Auto Double Flaring Copper Aluminum Soft Steel Brake Line and Brass Tubing Tool Kit #ad

ABN Auto Double Flaring Copper Aluminum Soft Steel Brake Line and Brass Tubing Tool Kit

ABN Auto Double Flaring Copper Aluminum Soft Steel Brake Line and Brass Tubing Tool Kit #ad - Double flaring copper aluminum soft steel brake line & brass tubing tool kit designed to use when flaring double or single flare in copper, aluminum, brass, magnesium, and soft steel brake line tubing. Yoke is forged from heat treated steel to ensure durability and strength. Comes securely & safely stored in a blow molded case for easy transportation. The following adapters are included 3/16, 1/4, 5/16, 3/8, 1/2 along with the following flaring tools 3/16, 1/4, 5/16, 3/8, 1/2. Swivel is constructed out of alloy steel and chrome plated to assist in reducing friction.

 

Copper Nickel Brake Line Tubing Kit 316 25 Foot Coil Roll Fittings Spring Wrap L-5-4  L-3-2  L-3-5 #ad

Copper Nickel Brake Line Tubing Kit 3/16 25 Foot Coil Roll Fittings Spring Wrap (L-5-4 + L-3-2 + L-3-5)

Copper Nickel Brake Line Tubing Kit 3/16 25 Foot Coil Roll Fittings Spring Wrap (L-5-4 + L-3-2 + L-3-5) #ad - Specifications inline tube steel brake line coil 3/16″ x 25 foot all inline tube tubing conforms to the following • wall thickness =. 028″ wall thickness so that it is easy to flare, bend and install. 70mm) • elongation in 2″ (50mm) = 14% • hardness (rockwell 30t scale) 35 • clean finish inside and out • leak and vibration resistance • specifications sae j527b din 74234 sae j1290 iso 4038 sae j1650 gm123m astm a254 yield strength 24,656 psi tensile strength 42,061 psi working pressure 4,500 psi burst pressure 17, 900 psi copper nickel. This is one roll of 3/16 brake line. Easy to work with. Cn3, oem spec, automotive 3/16″ copper cupro nickel brake line 25′ coil, 1 roll & fpm01 brake line fittings 3/8-24, 7/16-24, 1/2-20, 9/16-18 (this is the most common standard fittings in the automotive industry). & 5 foot of stainless spring wrap. Worth the extra cost over zinc or stainless if you are bending your own with no experience. Used for all automotive applications,. This is the softest tube on the market, bend by hand flare with any flare tool, even the cheapest lowest tool will still flare this tube. 028 (. It is manufactured by inline tube.

 

Copper Nickel Brake Line Tubing Kit 316 OD 25 Foot Coil Roll all Size Fittings L-5-4  L-3-2 #ad

Copper Nickel Brake Line Tubing Kit 3/16 OD 25 Foot Coil Roll all Size Fittings (L-5-4 + L-3-2)

Copper Nickel Brake Line Tubing Kit 3/16 OD 25 Foot Coil Roll all Size Fittings (L-5-4 + L-3-2) #ad - Easy to work with. 70mm) • elongation in 2″ (50mm) = 14% • hardness (rockwell 30t scale) 35 • clean finish inside and out • leak and vibration resistance • specifications sae j527b din 74234 sae j1290 iso 4038 sae j1650 gm123m astm a254 yield strength 24,656 psi tensile strength 42,061 psi working pressure 4,500 psi burst pressure 17, 900 psi copper nickel. Specifications inline tube steel brake line coil 3/16″ x 25 foot all inline tube tubing conforms to the following • wall thickness =. Oem spec, automotive 3/16″ copper cupro nickel brake line 25′ coil, 1 roll & fpm01 brake line fittings 3/8-24, 7/16-24, 1/2-20, 9/16-18 (this is the most common standard fittings in the automotive industry). Used for all automotive applications,. It is manufactured by inline tube. 028″ wall thickness so that it is easy to flare, bend and install. Worth the extra cost over zinc or stainless if you are bending your own with no experience. 028 (. This is one roll of 3/16 brake line. This is the softest tube on the market, bend by hand flare with any flare tool, even the cheapest lowest tool will still flare this tube.

 

Copper Nickel Brake Line Tubing Kit 316 OD 25 Foot Coil Roll 38-24 Fittings L-5-4  D-3-12 #ad

Copper Nickel Brake Line Tubing Kit 3/16 OD 25 Foot Coil Roll & 3/8-24 Fittings (L-5-4 + D-3-12)

Copper Nickel Brake Line Tubing Kit 3/16 OD 25 Foot Coil Roll & 3/8-24 Fittings (L-5-4 + D-3-12) #ad - This is the softest tube on the market, bend by hand flare with any flare tool, even the cheapest lowest tool will still flare this tube. This is one roll of 3/16 brake line. Used for all automotive applications,. Worth the extra cost over zinc or stainless if you are bending your own with no experience. 70mm) • elongation in 2″ (50mm) = 14% • hardness (rockwell 30t scale) 35 • clean finish inside and out • leak and vibration resistance • specifications sae j527b din 74234 sae j1290 iso 4038 sae j1650 gm123m astm a254 yield strength 24,656 psi tensile strength 42,061 psi working pressure 4,500 psi burst pressure 17, 900 psi copper nickel. It is manufactured by inline tube. Specifications inline tube steel brake line coil 3/16″ x 25 foot all inline tube tubing conforms to the following • wall thickness =. 028″ wall thickness so that it is easy to flare, bend and install. Cn3, oem spec, automotive 3/16″ copper cupro nickel brake line 25′ coil, 1 roll & 16 tn01 3/8-24 brake line fittings (this is the most common standard fitting in the automotive industry). 028 (. Easy to work with.

 

NickelCopper Brake Line Tubing Coil 316 x 25 #ad

Nickel/Copper Brake Line Tubing Coil, 3/16″ x 25′

Nickel/Copper Brake Line Tubing Coil, 3/16″ x 25′ #ad - This includes brake, fuel and transmission systems. S. 6% copper. 3/16″ x 25′ nickel/copper/iron alloy tubing, when combined with tube nuts and flaring tool, coils are an economical solution for shops that want to build their own lines, custom lengths or non-standard applications. 8% manganese, and 88. Nicopp lines and tubing meet the following specifications saej1047, iso 4038, saej1650, din 74234, bs2871. Requirements for brake tubing. 4% iron, 0. This alloy is approximately 9. Nickel-copper, commonly referred to as ’90-10 copper’, has been used on several european vehicle brake systems since the 1970’s, including volvo, audi, porsche, and aston martin., Nicopp does not rust or corrode, dot approved for hydraulic brake systems, bends 58% easier than steel tubing, available in coils of 25′, 50′, and 100′, finished lines available for domestic & import, black oxide fittings 2x corrosion resistance. Nicopp has been used on hydraulic/fluid transfer systems on vehicles where steel lines and tubing are commonly used. Under the uns system, this alloy is designated as uns c70600. Nicopp is a nickel-copper alloy brake tubing that meets sae standard j1047 and iso 4038 meeting all international and u. Nicopp is also easier to bend and form than steel tubing. Nicopp is considered the super-premium brand in brake lines and should be considered where the underbody of the vehicle is subjected to the harshest environments, where the longest life-span for lines is required, and/or where direct oem replacement is desired. Nicopp therefore has the strength and structural integrity of steel lines but with the added benefit of being much more corrosion resistant. Use to fabricate 3/16″ domestic, european, japanese, british, and adapter brake lines. 2% nickel, 1.

 

NickelCopper Brake Line Tubing Coil 316 x 100 #ad

Nickel/Copper Brake Line Tubing Coil, 3/16″ x 100′

Nickel/Copper Brake Line Tubing Coil, 3/16″ x 100′ #ad - Nicopp has been used on hydraulic/fluid transfer systems on vehicles where steel lines and tubing are commonly used. Under the uns system, this alloy is designated as uns c70600. 6% copper. Nicopp is also easier to bend and form than steel tubing. 4% iron, 0. Nicopp therefore has the strength and structural integrity of steel lines but with the added benefit of being much more corrosion resistant. Nickel-copper, commonly referred to as ’90-10 copper’, has been used on several european vehicle brake systems since the 1970’s, including volvo, audi, porsche, and aston martin. Use to fabricate 3/16″ domestic, european, japanese, british, and adapter brake lines. Nicopp is considered the super-premium brand in brake lines and should be considered where the underbody of the vehicle is subjected to the harshest environments, where the longest life-span for lines is required, and/or where direct oem replacement is desired. 2% nickel, 1. This alloy is approximately 9., Nicopp does not rust or corrode, dot approved for hydraulic brake systems, bends 58% easier than steel tubing, available in coils of 25′, 50′, and 100′, finished lines available for domestic & import, black oxide fittings 2x corrosion resistance. Nicopp is a nickel-copper alloy brake tubing that meets sae standard j1047 and iso 4038 meeting all international and u. S. 3/16″ x 100′ nickel/copper/iron alloy tubing. This includes brake, fuel and transmission systems. When combined with tube nuts and flaring tool, coils are an economical solution for shops that want to build their own lines, custom lengths or non-standard applications. Nicopp lines and tubing meet the following specifications saej1047, iso 4038, saej1650, din 74234, bs2871. 8% manganese, and 88. Requirements for brake tubing.

 

Zinc Steel Brake Line Tubing Kit 316 OD Coil Roll 15 Metric Fittings Nuts 10MM L-2-1  D-3-11 #ad

Zinc Steel Brake Line Tubing Kit 3/16 OD Coil Roll 15 Metric Fittings Nuts 10MM (L-2-1 + D-3-11)

Zinc Steel Brake Line Tubing Kit 3/16 OD Coil Roll 15 Metric Fittings Nuts 10MM (L-2-1 + D-3-11) #ad - 028 (. 0 tn24 this is the most common size metric tube nut that fits into everything. This is one roll of 3/16 brake line. Used for all automotive applications,. Specifications inline tube steel brake line coil 3/16″ x 25 foot all inline tube tubing conforms to the following • wall thickness =. 028″ wall thickness so that it is easy to flare, bend and install. 70mm) • elongation in 2″ (50mm) = 14% • hardness (rockwell 30t scale) 65 • clean finish inside and out • leak and vibration resistance • specifications sae j527b din 74234 sae j1290 iso 4038 sae j1650 gm123m astm a254 yield strength 24,656 psi tensile strength 42,061 psi working pressure 4,500 psi burst pressure 17, 900 psi zinc plated. It is manufactured by inline tube. Metric 10mm, 3/16 zinc tube 25′, zinc plated tube nut fittings, (15) 10mmx1.

 

Copper Nickel Brake Line Tubing Kit 316 OD 25 Foot Coil Roll Metric Fittings L-5-4  D-3-11 #ad

Copper Nickel Brake Line Tubing Kit 3/16 OD 25 Foot Coil Roll & Metric Fittings (L-5-4 + D-3-11)

Copper Nickel Brake Line Tubing Kit 3/16 OD 25 Foot Coil Roll & Metric Fittings (L-5-4 + D-3-11) #ad - Easy to work with. Used for all automotive applications,. It is manufactured by inline tube. This is one roll of 3/16 brake line. 70mm) • elongation in 2″ (50mm) = 14% • hardness (rockwell 30t scale) 35 • clean finish inside and out • leak and vibration resistance • specifications sae j527b din 74234 sae j1290 iso 4038 sae j1650 gm123m astm a254 yield strength 24,656 psi tensile strength 42,061 psi working pressure 4,500 psi burst pressure 17, 900 psi copper nickel. 028″ wall thickness so that it is easy to flare, bend and install. Cn3, oem spec, automotive 3/16″ copper cupro nickel brake line 25′ coil, 1 roll & 15 metric 10mmx1. 0 tn24 brake line fittings (this is the most common metric fitting in the automotive industry). This is the softest tube on the market, bend by hand flare with any flare tool, even the cheapest lowest tool will still flare this tube. 028 (. Worth the extra cost over zinc or stainless if you are bending your own with no experience. Specifications inline tube steel brake line coil 3/16″ x 25 foot all inline tube tubing conforms to the following • wall thickness =.

 

NickelCopper Brake Line Tubing Coil 14 x 50 #ad

Nickel/Copper Brake Line Tubing Coil, 1/4″ x 50′

Nickel/Copper Brake Line Tubing Coil, 1/4″ x 50′ #ad - 1/4″ x 50′ nickel/copper/iron alloy tubing, use to fabricate 1/4″ domestic and adapter brake lines. When combined with tube nuts and flaring tool, coils are an economical solution for shops that want to build their own lines, custom lengths or non-standard applications. Nicopp is also easier to bend and form than steel tubing. Nicopp has been used on hydraulic/fluid transfer systems on vehicles where steel lines and tubing are commonly used. This alloy is approximately 9. 8% manganese, and 88. Nicopp lines and tubing meet the following specifications saej1047, iso 4038, saej1650, din 74234, bs2871. 6% copper. This includes brake, fuel and transmission systems. Nickel-copper, commonly referred to as ’90-10 copper’, has been used on several european vehicle brake systems since the 1970’s, including volvo, audi, porsche, and aston martin. Nicopp is considered the super-premium brand in brake lines and should be considered where the underbody of the vehicle is subjected to the harshest environments, where the longest life-span for lines is required, and/or where direct oem replacement is desired. Requirements for brake tubing. Nicopp therefore has the strength and structural integrity of steel lines but with the added benefit of being much more corrosion resistant. Under the uns system, this alloy is designated as uns c70600. 4% iron, 0. 2% nickel, 1. S., Nicopp does not rust or corrode, dot approved for hydraulic brake systems, bends 58% easier than steel tubing, available in coils of 25′, 50′, and 100′, finished lines available for domestic & import, black oxide fittings 2x corrosion resistance. Nicopp is a nickel-copper alloy brake tubing that meets sae standard j1047 and iso 4038 meeting all international and u.

 

25 ft Copper Nickel 316 Brake Line Tubing w metric brake Line invert flare fittings 10 x 1 mm Pack of 10 fittings #ad

25 ft. Copper Nickel 3/16″ Brake Line Tubing w/ metric brake Line invert flare fittings. 10 x 1 mm (Pack of 10 fittings)

25 ft. Copper Nickel 3/16″ Brake Line Tubing w/ metric brake Line invert flare fittings. 10 x 1 mm (Pack of 10 fittings) #ad - There are a total of 10 fittings (10 mm nuts with a thread pitch of 1 mm) included. Kit includes everything you need to plumb a great brake line set. Roll of 3/16″ copper nickel brake line tubing and 10 metric inverted flare brake line fittings. Kit includes a 25 ft.

 

PMD Products 9 Tube Bending 316 14 Brake Line Tubing Forming Form Bend Pliers #ad

PMD Products 9″ Tube Bending 3/16″ 1/4″ Brake Line Tubing Forming Form Bend Pliers

PMD Products 9″ Tube Bending 3/16″ 1/4″ Brake Line Tubing Forming Form Bend Pliers #ad - 9″ tube bending 3/16″ 1/4″ brake line tubing forming form pliers (brand new in package) works on 3/16″ and 1/4″ tubing easily align, bend and adjust tubing allows forming of perpendicular (90 degree) bends provides kink free bends and tight radiuses drop-forged carbon steel comfort grips overall dimensions 9-1/8″ l x 2-5/16″ w.

 

NickelCopper Brake Line Tubing Coil 14 x 100 #ad

Nickel/Copper Brake Line Tubing Coil, 1/4″ x 100′

Nickel/Copper Brake Line Tubing Coil, 1/4″ x 100′ #ad - Nicopp is a nickel-copper alloy brake tubing that meets sae standard j1047 and iso 4038 meeting all international and u. Nicopp is also easier to bend and form than steel tubing. When combined with tube nuts and flaring tool, coils are an economical solution for shops that want to build their own lines, custom lengths or non-standard applications. Under the uns system, this alloy is designated as uns c70600. Nicopp has been used on hydraulic/fluid transfer systems on vehicles where steel lines and tubing are commonly used. Nicopp lines and tubing meet the following specifications saej1047, iso 4038, saej1650, din 74234, bs2871, bs2871. Nicopp is considered the super-premium brand in brake lines and should be considered where the underbody of the vehicle is subjected to the harshest environments, where the longest life-span for lines is required, and/or where direct oem replacement is desired. Nickel-copper, commonly referred to as ’90-10 copper’, has been used on several european vehicle brake systems since the 1970’s, including volvo, audi, porsche, and aston martin. Nicopp therefore has the strength and structural integrity of steel lines but with the added benefit of being much more corrosion resistant., Nicopp does not rust or corrode, dot approved for hydraulic brake systems, bends 58% easier than steel tubing, available in coils of 25′, 50′, and 100′, finished lines available for domestic & import, black oxide fittings 2x corrosion resistance. 8% manganese, and 88. This includes brake, fuel and transmission systems. 4% iron, 0. This alloy is approximately 9. 1/4″ x 100′ nickel/copper/iron alloy tubing, use to fabricate 1/4″ domestic and adapter brake lines. Requirements for brake tubing. 2% nickel, 1. 6% copper. S.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.